4 stud to 5 stud adapters?`

SiDaBa · Post by **SiDaBa** » Fri Apr 02, 2004 10:05 pm

Does anyone know where i can get hold of 4 to 5 stud adapters also with some information on them? can you still get 5 stud with 100 spacing if the 4 stud is already 100 spacing? Also how much do they cost?

thank you!!

Speedlaw · Post by **Speedlaw** » Sat Apr 03, 2004 3:15 pm

I know someone that ran 5x100 wheels on his 4x100 car, so yes it can be done using adapters. Don't know who sells these, he had them custom made. It's worth investigating if you can get these from a steel mill.

pettsy · Post by **pettsy** » Sat Apr 03, 2004 7:46 pm

im not sure myself. the best place to ask would be on the club gti forum, as there a quite a few people running porsche wheels which require adapters etc

http://www.clubgti.com/forum

SiDaBa · Post by **SiDaBa** » Sat Apr 03, 2004 8:43 pm

thanks guys!!

polo2k · Post by **polo2k** » Sun Apr 04, 2004 1:23 pm

if you use the same PCD then 2 of the studs will overlap and id be worried about strength then