Induction Kits/air filters

jezza · Post by **jezza** » Mon Nov 10, 2008 2:49 pm

Hi there, i've got a K&N 57i induction kit and I have fitted it the way it is shown. But the only thing I don't like is the way it sits on top. Is there anyway that it can be changed? I was thinking of getting piping from the intake and attaching the air filter to the end then clamping the filter somewhere where the lower intake ducts are. Any one got any pics of there's if they have them?

chrisjames · Post by **chrisjames** » Mon Nov 10, 2008 7:00 pm

Mate, I have been right round the block with this. Yes you can get pipe made up and you can make yourself brackets but if I were you I would get a BMC. That is what I will be getting. I bought a silicone reducer for the throttle body and made custom pipe. It was all very expensive.

http://www.venairsport.co.uk/

I would recommend these guys for great products.