Coilovers
- chrisjames
- Silver Member
- Posts: 413
- Joined: Tue Apr 08, 2008 8:55 pm
- Location: Edinburgh / Poole
- Contact:
-
young dubber
- Bronze Member
- Posts: 144
- Joined: Wed Oct 31, 2007 12:55 pm
- Location: burton on trent staffs
the budget ones are brill. ive run mine for a good few months now and they are holding up a treat. just one thing they are prone to seizing so make sure the threads are well lubricated.
altho a little harsh on the ride you get what you paid for and in my eyes are a really good set!
peice of p*** to fit if mechanicly minded!
do the good thing...get a set
altho a little harsh on the ride you get what you paid for and in my eyes are a really good set!
peice of p*** to fit if mechanicly minded!
do the good thing...get a set
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Depends how low you go, and how big the speed bumps are.JayDee wrote:Be no bother to me mate as a am a mechanic lol. what are they like over speedbumps. Have to go over about 20 of the things to even get into my driveway lol
James
The standard hard rubber ones that are split into three aren't too bad, 1st gear slow and windle over them. It's biggish concrete ones you want to look out for.
-
young dubber
- Bronze Member
- Posts: 144
- Joined: Wed Oct 31, 2007 12:55 pm
- Location: burton on trent staffs
Coil overs
ive just been loookin at those coil overs
as you say there easy to fit
but what needs to be done after there fitted?
like camber and tracking
and wats the max you can lower them by?
thanks
ian
as you say there easy to fit
but what needs to be done after there fitted?
like camber and tracking
and wats the max you can lower them by?
thanks
ian
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: Coil overs
Easy to fit if you know what your doing. Yes camber and tracking needs doing, that's it. Depends on the kit you buy, they go down to about 120mm.Flattley wrote:ive just been loookin at those coil overs
as you say there easy to fit
but what needs to be done after there fitted?
like camber and tracking
and wats the max you can lower them by?
- revolutionrock
- Getting There!
- Posts: 61
- Joined: Tue Dec 16, 2008 4:06 pm
Re: Coilovers
I think I am going to buy hot tuning coilovers, any one knows what the Postage cost to sweden?
/JB (sweden)
/JB (sweden)

