how to remove front VW badge

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
Harnz
Silver Member
Posts: 438
Joined: Thu Sep 27, 2007 6:00 pm
Location: LONDON

how to remove front VW badge

Post by Harnz »

? i looked but could not see how. got the rear one off wid ease :cry:
Harnz
Silver Member
Posts: 438
Joined: Thu Sep 27, 2007 6:00 pm
Location: LONDON

Post by Harnz »

step by set how is this done very confused lol
panda
Silver Member
Posts: 355
Joined: Tue Feb 28, 2006 6:14 pm

Post by panda »

Pull it! HARD!
Harnz
Silver Member
Posts: 438
Joined: Thu Sep 27, 2007 6:00 pm
Location: LONDON

Post by Harnz »

ok and will that make the whole badge including the plastic holding it behind come out?
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Post by KennyPOLO_Gti »

To remove the full badge just twist it 30 degrees to the left and it should pull out mate. The badge is pretty much held in the same as the H7 bulbs are if u have ever removed them. Then get a knife and carefully pry the silver bagde off :P
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Post by KennyPOLO_Gti »

panda wrote:Pull it! HARD!
Dont pull it hard or you will snap the lugs that hold it in place!!!!
Harnz
Silver Member
Posts: 438
Joined: Thu Sep 27, 2007 6:00 pm
Location: LONDON

Post by Harnz »

thanks you kenny lucky i didnt go and pull it hard :lol:
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Post by KennyPOLO_Gti »

Did u get it off then?
ranson90
Bronze Member
Posts: 175
Joined: Fri Sep 19, 2008 7:21 pm
Location: Durham

Post by ranson90 »

yeah took me a while to get mine off to fit chewys painted 9n badge

(which by the way is a different clip on system if anyone was thinking about putting a 9n one on its the same badge but doesn't clip on unless you have hot glue and a stanley)

but yes if you take the grill out

4 torks looking down over when u lift the bonnet

pull the grill out
and just turn it round .u can see how it works kinda
User avatar
chewy
Platinum Member
Posts: 1628
Joined: Sat Feb 09, 2008 3:15 pm
Location: Durham

Post by chewy »

You got any pics of it yet neil?
Harnz
Silver Member
Posts: 438
Joined: Thu Sep 27, 2007 6:00 pm
Location: LONDON

Post by Harnz »

yh got it out gota super glue 2 ov the clips coz der hangin off
User avatar
Jeff GTi
Platinum Member
Posts: 1789
Joined: Sat Jan 06, 2007 1:54 pm

Post by Jeff GTi »

the badge for the 9n and 9n3 are the same part number, hence, being the same part
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Post by KennyPOLO_Gti »

Harnz wrote:yh got it out gota super glue 2 ov the clips coz der hangin off
What u super glueing??? :? :? :?
Harnz
Silver Member
Posts: 438
Joined: Thu Sep 27, 2007 6:00 pm
Location: LONDON

Post by Harnz »

hav 2 glue the clips back on kind broke lol :lol:
ranson90
Bronze Member
Posts: 175
Joined: Fri Sep 19, 2008 7:21 pm
Location: Durham

Post by ranson90 »

there was 1 off the durhamdubs meet last week chewy by jamie... but u cudnt see it very well

if u speak to him he might have a couple

looks better in person tho

will have to meet up some time for a drive or sumit.
Post Reply