Hi,
I will be fitting my Weitecs in the next few weeks (should have been last week, but it didn't happen thanks to Strictly Dubs!).
What parts will I need to carry over from my old suspension? As I would rather just buy the parts new (I have bought £250 worth of bolts and bushes so I am not going the scrimp at the last bit!). I already have brand new top mounts and bearings, it looks like I need the top cups?
Thanks!
Weitec Hi Con TX Coilover Fitting on 9N 1.9 TDi Sport
-
George Agdgdgwngo
- New
- Posts: 46
- Joined: Mon Oct 27, 2008 9:00 pm
-
jap_master
- New
- Posts: 19
- Joined: Fri May 09, 2008 10:52 am
- Location: S.Wales
-
yorks GT TDI
- Sponsor
- Posts: 1082
- Joined: Sun Aug 21, 2005 3:35 pm
-
George Agdgdgwngo
- New
- Posts: 46
- Joined: Mon Oct 27, 2008 9:00 pm
6LL 407 183
Ibiza Cupra Front Wishbone Bushes (x2)
6.20
G 294 421 A1
Lube for fitting Console Bush
6.99
6N0 412 249 C
Ibiza Cupra Top Mount Bearing (x2)
8.15
6Q0 412 331 B
Ibiza Cupra Top Mount Bush (x2)
9.28
6Q0 199 851 AT
Ibiza Cupra TDi Engine Dog Bone Mount
20.34
N 907 750 01
Undertray Screw (X9)
0.27
N 015 439 1
Undertray Nut (X6)
0.21
N 103 271 01
Undertray Speednut (X3)
0.10
N 905 333 01
Undertray Clip (X10)
0.13
6Q0 423 811
NS Tie Rod End
16.98
6Q0 423 812
OS Tie Rod End
16.98
6Q0 407 365 M
NS Balljoint
20.74
6Q0 407 366 M
OS Balljoint
20.72
Items 8,9,11 & 13
N 905 173 04
#8 - Screw Hex (X2)
0.89
N 102 861 10
#9 - Nut (X2)
0.35
N 906 484 02
#11 - Bolt (X4)
1.26
N 104 037 02
#13 - Nut (X2)
0.68
Items 3,4,6,16 & 17
N 101 277 07
#3-Bolt Hex (X6)
0.55
N 101 418 01
#4-Bolt Hex Head (Combi) (X2)
2.33
N 908 088 01
#6-Nut (X2)
0.54
N 909 548 02
#16-Torx Socket (X2)
1.02
N 101 064 02
#17-Hex Nut (X2)
0.56
Items 5 & 7
N 104 018 01
#5 - Shouldered Nut (X2)
1.15
N 101 277 07
#7- Bolt Hex (X2)
0.57
Total: £179.82
VAT: £31.47
Postage: £18.71
Grand Total: £230.00
So I was £20 off but then I need the ARB Droplinks as well, which puts it over £250.
Ibiza Cupra Front Wishbone Bushes (x2)
6.20
G 294 421 A1
Lube for fitting Console Bush
6.99
6N0 412 249 C
Ibiza Cupra Top Mount Bearing (x2)
8.15
6Q0 412 331 B
Ibiza Cupra Top Mount Bush (x2)
9.28
6Q0 199 851 AT
Ibiza Cupra TDi Engine Dog Bone Mount
20.34
N 907 750 01
Undertray Screw (X9)
0.27
N 015 439 1
Undertray Nut (X6)
0.21
N 103 271 01
Undertray Speednut (X3)
0.10
N 905 333 01
Undertray Clip (X10)
0.13
6Q0 423 811
NS Tie Rod End
16.98
6Q0 423 812
OS Tie Rod End
16.98
6Q0 407 365 M
NS Balljoint
20.74
6Q0 407 366 M
OS Balljoint
20.72
Items 8,9,11 & 13
N 905 173 04
#8 - Screw Hex (X2)
0.89
N 102 861 10
#9 - Nut (X2)
0.35
N 906 484 02
#11 - Bolt (X4)
1.26
N 104 037 02
#13 - Nut (X2)
0.68
Items 3,4,6,16 & 17
N 101 277 07
#3-Bolt Hex (X6)
0.55
N 101 418 01
#4-Bolt Hex Head (Combi) (X2)
2.33
N 908 088 01
#6-Nut (X2)
0.54
N 909 548 02
#16-Torx Socket (X2)
1.02
N 101 064 02
#17-Hex Nut (X2)
0.56
Items 5 & 7
N 104 018 01
#5 - Shouldered Nut (X2)
1.15
N 101 277 07
#7- Bolt Hex (X2)
0.57
Total: £179.82
VAT: £31.47
Postage: £18.71
Grand Total: £230.00
So I was £20 off but then I need the ARB Droplinks as well, which puts it over £250.
-
whitegtipolo
- Bling Bling Diamond Member
- Posts: 2262
- Joined: Mon Mar 10, 2008 5:09 pm
- Location: 270bhp 9n3 1.8t cr turbo
-
George Agdgdgwngo
- New
- Posts: 46
- Joined: Mon Oct 27, 2008 9:00 pm
The undertray screws are pretty fragile after 5 years, and when my gear linkage broke the mechanic broke 3 of them, so I thought I would just buy the full set, in case I broke any as well.
The Dog Bone Mount is the middle engine mounting that attaches to the subrame and stops the engine rocking backwards and forwards. Mine is mullered as the buy who had the car before gave it some hammer, but at that price is can be a replaceable item.
That okay for everyone?
The Dog Bone Mount is the middle engine mounting that attaches to the subrame and stops the engine rocking backwards and forwards. Mine is mullered as the buy who had the car before gave it some hammer, but at that price is can be a replaceable item.
That okay for everyone?