Double Din Installation help

wburton · Post by **wburton** » Mon Dec 15, 2008 5:10 pm

Hey, i've purchased a Double Din DVD monitor for my polo, and been trying to work out what i will need to install it, ive had a look at some other threads but still condused! Would really appreciate it if someone could just help me out on what i will need for it to fit and work properly.
Thanks guys

ryandel_9n3 · Post by **ryandel_9n3** » Mon Dec 15, 2008 5:22 pm

how new is it?mines is and 08 plate
i had to get an iso adapter and then a adapter for the arial.
hope this helps

wburton · Post by **wburton** » Mon Dec 15, 2008 6:45 pm

thanks alot, its an 07 reg. so other than those two bits would i not need a cage or fascia adapter atall? also where did you get the two parts you mentioned from? thanks very much

ryandel_9n3 · Post by **ryandel_9n3** » Mon Dec 15, 2008 6:55 pm

did your new one not come with cage?
got them from halfords man.
whats the iso connecters like from your car?is it two bits or just the one big one?

GTi_dan · Post by **GTi_dan** » Mon Dec 15, 2008 6:56 pm

This is basically what i used to convert my VW wiring to standard ISO...

http://www.bluespot.co.uk/install/show_model.asp?id=297

(see item ref - 7607621175) 20quid.

wburton · Post by **wburton** » Tue Dec 16, 2008 3:04 pm

Ok, thanks alot guys, looks like i'll need an iso and aerial adapter. Waiting for the headunit to come through so not sure what it comes with but will ring store and check. How about the fascia adapter to go around the unit? where could i get one of them from?