I Scratched My Alloy!!

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
User avatar
aaronon
Gold Member
Posts: 597
Joined: Tue Nov 25, 2008 6:11 pm
Location: Belfast.

I Scratched My Alloy!!

Post by aaronon »

:oops:

Well. . . pulling up to a curb I seem to have hit it and scratched my alloy. As I heard the scrape and felt the jolt I felt a sharp pain deep in my soul and new what I'd done.

There's a scratch on it that looks as if the plastic covering has come off. . . does this automatically lead to rust from weathering? . . If so does anyone recommend any good cleaners that will protect it from rust and how often i'd need to clean them with it?
User avatar
chewy
Platinum Member
Posts: 1628
Joined: Sat Feb 09, 2008 3:15 pm
Location: Durham

Re: I Scratched My Alloy!!

Post by chewy »

Its a alloy wheel it will not rust, get a pic of the damage. Could be easier getting it repaired
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: I Scratched My Alloy!!

Post by Tim_GTi »

On a different note, seal your wheel with Poorboy's wheel sealant, it'll stop them pitting and corroding and will generally make them easier to clean.
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: I Scratched My Alloy!!

Post by KennyPOLO_Gti »

Your not gonna get any rust as has been said and if you clean your alloys regularly then you wont have any problem at all apart from looking at it all the time!

I use auto glym super resin then auto glym extra gloss protection then some auto glym alloy sealant on mines once a month. Keeps then nice and shiney and sooooo much easier when coming to clean them next time round :D

Get some pics up mate :roll:
sylvester
Getting There!
Posts: 93
Joined: Wed Oct 24, 2007 12:46 am

Re: I Scratched My Alloy!!

Post by sylvester »

If the scratch is deep enough to expose the alloy the wheel is manufactured from it will corrode (I'm sure you've seen this on old alloy wheels) , more so at this time of year due to salt on the roads :evil: I would put some clear laquer over the scratch to seal it until you get it repaired. As mentioned poorboys will help but you will have to keep re-appying it to keep it sealed.
User avatar
aaronon
Gold Member
Posts: 597
Joined: Tue Nov 25, 2008 6:11 pm
Location: Belfast.

Re: I Scratched My Alloy!!

Post by aaronon »

Thanks for the replies.

I'll take a picture tomorrow and hopefully i'm over-reacting and it doesn't need repaired.

Do you take the car to Volkswagen to have it repaired?
sylvester
Getting There!
Posts: 93
Joined: Wed Oct 24, 2007 12:46 am

Re: I Scratched My Alloy!!

Post by sylvester »

A good paintshop will advise, even chipsaway, dentmaster may fix the problem with a "smart repair" . To be fair its usually the front n/side wheel that gets it, laquer the damage, coz you'll do it again :evil: Its a bit like parking away from everybody, but when you come back there's a car parked next to you usually 4 doors and a child seat....dink..!
Post Reply