MK4 Golf seats into MK5 Polo
- luke_poloe
- Bronze Member
- Posts: 134
- Joined: Thu Sep 18, 2008 10:36 am
- Location: Manchester Drives: 6N2 1.0L E
MK4 Golf seats into MK5 Polo
I have been offered a set of Golf GTI front seats does anyone know if they will drop straight in or will modifications be needed for them to fit properly ?
Re: MK4 Golf seats into MK5 Polo
nope they will need new subframes, only seats that go in to mk5 polo is mk4 polo seats, ibiza seats and mk3 golf but the last 2 need minor mods to make them fit, wouldnt the golf seats be abit big for the polo? dont think ive seen a set in there before? id go for it mate, get some sub frames made up!
- alexperkins
- Site Admin
- Posts: 14873
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: MK4 Golf seats into MK5 Polo
Although.....there was a mk5 on here a while back with some Golf recaro seats that had been fitted by grinding off part of the golf subframe and bending something underneath and they fitted straight in.
Re: MK4 Golf seats into MK5 Polo
im in similar situation. i can get some leather seats which are currently in a mk3 golf vr6, but they were taken from a mk4 golf.. So will it fit my 6n2 polo??
- alexperkins
- Site Admin
- Posts: 14873
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: MK4 Golf seats into MK5 Polo
If they fit a mk3 VR6 they should fit a polo
Re: MK4 Golf seats into MK5 Polo
Jus got off the phone to the guy,. hes sayin that i have to slightly modify the seat frames as they are wobbly, same for the back seats..alexperkins wrote:If they fit a mk3 VR6 they should fit a polo
i think its too much of a job, need to look elsewhere for mk3 seats..
- luke_poloe
- Bronze Member
- Posts: 134
- Joined: Thu Sep 18, 2008 10:36 am
- Location: Manchester Drives: 6N2 1.0L E
Re: MK4 Golf seats into MK5 Polo
i'm going to test fit them at weekend just to see if theres enough space, how hard is it to get a sub frame made up is it a specialist job or would i be able to get them done at a metal fabricators
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: MK4 Golf seats into MK5 Polo
Any decent welders mate.



