drop links!!
- whitegtipolo
- Bling Bling Diamond Member
- Posts: 2262
- Joined: Mon Mar 10, 2008 5:09 pm
- Location: 270bhp 9n3 1.8t cr turbo
drop links!!
if anyone has fk drop links can you please measure them from ball pin to ball pin end!! cheers just sourcing some same length or shorther but from other makes of cars??!!
Re: drop links!!
the droplinks with my old fks were about 25cm, got some 16cm vmax droplinks from dpm on my new setup
ford mondeo drop links fit, but i would never stoop so low as to fit ford parts
not much difference in price either
ford mondeo drop links fit, but i would never stoop so low as to fit ford parts
not much difference in price either
- whitegtipolo
- Bling Bling Diamond Member
- Posts: 2262
- Joined: Mon Mar 10, 2008 5:09 pm
- Location: 270bhp 9n3 1.8t cr turbo
Re: drop links!!
well the ford ones cost me just under £30 trade and are 24cm long but i think i need shorter ones tbh!ceedubya wrote:the droplinks with my old fks were about 25cm, got some 16cm vmax droplinks from dpm on my new setup![]()
ford mondeo drop links fit, but i would never stoop so low as to fit ford parts![]()
not much difference in price either
Re: drop links!!
these are what i have = http://www.dpmperformance.co.uk/vmaxx-f ... -2513.htmlwhitegtipolo wrote:well the ford ones cost me just under £30 trade and are 24cm long but i think i need shorter ones tbh!ceedubya wrote:the droplinks with my old fks were about 25cm, got some 16cm vmax droplinks from dpm on my new setup![]()
ford mondeo drop links fit, but i would never stoop so low as to fit ford parts![]()
not much difference in price eitherill wait and see as the fk ones are £40 so might just get them!!
they are the ones to get if you have it very low
- whitegtipolo
- Bling Bling Diamond Member
- Posts: 2262
- Joined: Mon Mar 10, 2008 5:09 pm
- Location: 270bhp 9n3 1.8t cr turbo
Re: drop links!!
i need them as when entering my drive on lock it knocks on the drive shaft !! will these solve this?? look very short?? 
Re: drop links!!
they are fitted to my car and they work fine, they take the antiroll bar right out the way of drive shaft
- whitegtipolo
- Bling Bling Diamond Member
- Posts: 2262
- Joined: Mon Mar 10, 2008 5:09 pm
- Location: 270bhp 9n3 1.8t cr turbo
Re: drop links!!
good stuff!!! 
