ADVISE ON WHEELS quick answer would be appreciated

Chat about your MKIV (6N) Polo
Post Reply
Aziise
New
Posts: 29
Joined: Sat Aug 09, 2008 1:31 am

ADVISE ON WHEELS quick answer would be appreciated

Post by Aziise »

Right - well i am in dier need of new alloys - currecntly iam rolling on spares :evil:
ive found some pretty nice alloys....but they are 17" lol

Wouldnt mind having them - but i was wondering if they would fit or not?

"They are multistud so will fit various cars. Fitted fine on my 4x100 Corsa and have an offset of ET35."

I think that should fit? - quick answer if anyone knows please!

Amin
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: ADVISE ON WHEELS quick answer would be appreciated

Post by Tim_GTi »

Check the centre bore, you need 57.1. If it's bigger you can can spigot rings, if it's smaller I wouldn't advise them.

17s look huage on a Polo, Not my look at all, but they do go on ok. You'll need some low profile tyres on them, probably 35s? Depends what width they are.
Aziise
New
Posts: 29
Joined: Sat Aug 09, 2008 1:31 am

Re: ADVISE ON WHEELS quick answer would be appreciated

Post by Aziise »

Hmm yea thanks for that

But i think 17's will go on my future S3!! for now i think the old 6n will do fine with 15's lol! But thanks for that - was wondering what you might advise - i need some 15's - second hand will do for now cause my budget is literally....upto about £120 - where should i go?
Been to about a million scrappies - no-one seems to have any - and ebay is generally a bit pricy for them?
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: ADVISE ON WHEELS quick answer would be appreciated

Post by Tim_GTi »

Cehck on edition38 and wheelwhores forums, they're the best place.
Post Reply