Fitting Milltek turbo back
-
loud
- Gold Member
- Posts: 989
- Joined: Tue Jul 20, 2004 12:17 pm
- Location: 25 miles south of Aberdeen Drives: 9N3 Polo GTi
Fitting Milltek turbo back
I've fitted plenty of exhausts on older cars but never a turbo back system on a modern car, can anyone fill me in on the details of fitting the sensors and if there are any gaskets there which should be replaced?
-
whitegtipolo
- Bling Bling Diamond Member
- Posts: 2262
- Joined: Mon Mar 10, 2008 5:09 pm
- Location: 270bhp 9n3 1.8t cr turbo
Re: Fitting Milltek turbo back
dont snap a bolt in your turbo like the garage did on mine lube it overnight then take it slow , if it feels tight warm it up but not too much or it will snap, it helps to wind it back on then off etc etc to free it off!! 