9n3 gti rear valance

[Kuru14]

Looking for a rear valance from a polo gti ,9n3. Anyone got one or know where i can get one from?

Would dealers be the best option and if so anyone know how much or a part number?

Thanks

[RITCHAT]

Looking for a rear valance from a polo gti ,9n3. Anyone got one or know where i can get one from?

Would dealers be the best option and if so anyone know how much or a part number?

Thanks

Hi

Part number is as follows and are readily available at £35.22+ vat @ 15% less any discount you can negotiate.

V6Q6 807 521 A9 B9

You will need 1* tx30 screwdriver ,1* a flat blade screw driver and a rubber mallet and a cloth to protect your own bumper. Takes about 15 minutes to fit no need to remove bumper can be done whilst on the car. Theres is three screws to be removed for the valance and possibily 5 tx 20 screws if you have mud flaps fitted on the rear each side to remove so another screwdriver required. Give the mud flaps a good wash before refitting as will be full of mud etc. The mud flaps will fit back on no problem just one 2mm hole each side required to be drilled and you will be back to normal again.