Alloy/Tyre question
Alloy/Tyre question
Ino this is going to sound really stupid...but how much air should be put into a tyre of a 195/45 16" i put about 32 35(on the air gauge) but the they loook low still i want to put the right amount am i not putting enough??
- charlievwp
- Gold Member
- Posts: 577
- Joined: Fri Jul 27, 2007 4:42 pm
- Location: Milton Keynes, Bucks
- Contact:
Re: Alloy/Tyre question
Tyre pressures should be noted inside your fuel cap matie
- KennyPOLO_Gti
- Platinum Member
- Posts: 1552
- Joined: Fri Jan 12, 2007 8:04 pm
- Location: Ayrshire, Scotland
Re: Alloy/Tyre question
As Charlie says its on the cap, i have mine at 32 all round usually. But if you have that and it still looks flat then maybe the gauge is fooked??? Try another one and see mate??
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: Alloy/Tyre question
Could be the gauge, could be a dodgy tyre. Could be the nature of the tyre, what brand are they?
I get the same mind on my 165/50s, 32 psi looks well low.
I get the same mind on my 165/50s, 32 psi looks well low.



