you know my thoughts on this already ....
it IS the perfect way forward...
it will make a quick enough machine that is relaibel and good for everyday use...
the k03s hybrid is very similar to the k04 on the TT/S3/LCR except it is bolt on... no downpipe work required...
good for the same power.. probably better...
BUT BUT BUT
my deep down thoughts on this ...
1. a bolt on GT28RS isnt much more in cost
2. likely you need a better clutch anyway
3. you have to buy injectors and maf which ever route
4. you need more mapping for either route
But the GT28RS you can run low boost and make more power .. and later.. in a few months....or years you can go for broke .. and push 350+
Kenny... it is a difficult call... but I guess you think you will be happy with the hybrid then get bored an go GT28RS .... so I think.. miss out the middle bit.. do it properly.... proper BT...
Side note .. I remap plenty of TT225, S3 and LCR but they never blow me away... my ex beloved k04-001 Polo just as fast
