induction kit

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
User avatar
Jeff GTi
Platinum Member
Posts: 1789
Joined: Sat Jan 06, 2007 1:54 pm

induction kit

Post by Jeff GTi »

right is it just me or is there nothing bar the k&N 57i kit on the market for our cars

i want an induction kit thats going to perform, not to be boyish and really noisy, just a subtle difference, not suck up hot air

there just aint anything out there, or not as im finding, i dont want to use a cheap filter either thats likely to hinder performance not help

im considering a bmc cda, but omg how dear are they

hmmm, what to do

anyone any help or ideas
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Re: induction kit

Post by KennyPOLO_Gti »

The guys on the SCN forum all rate the Jetex filters. Tests were done on the air flow and the jetex was proved to be the most free flowing. Just another option :wink:
loud
Gold Member
Posts: 989
Joined: Tue Jul 20, 2004 12:17 pm
Location: 25 miles south of Aberdeen Drives: 9N3 Polo GTi

Re: induction kit

Post by loud »

the cupra guys seem to rate the dyna-twist highest, although iirc it's even more expensive than the bmc cda
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: induction kit

Post by Tim_GTi »

Have you tried a heat shield with your current kit?
Post Reply