Exhaust!

Chat about your MKV (6N2) Polo
Post Reply
User avatar
5509433
Silver Member
Posts: 330
Joined: Mon Aug 10, 2009 10:59 am

Exhaust!

Post by 5509433 »

I was in town and came across an R32.

I know that powerflow do custom exhausts, i was wondering if any one has already done this type of exhaust, and wondered what it would look like on a polo!

It looks sick!
User avatar
lowfoon
Gold Member
Posts: 617
Joined: Thu Dec 18, 2008 10:20 pm
Location: Croydon, Surrey
Contact:

Re: Exhaust!

Post by lowfoon »

Personally, PowerFlow are crap
Jordy-6n2
Bronze Member
Posts: 153
Joined: Mon Sep 28, 2009 12:13 pm

Re: Exhaust!

Post by Jordy-6n2 »

Go sportex single 3". Sounds amazing!
User avatar
6N2 GTI 00
Bling Bling Diamond Member
Posts: 4143
Joined: Mon Dec 08, 2008 9:20 am
Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!

Re: Exhaust!

Post by 6N2 GTI 00 »

I wanted to go for an R32 like twin pipe exhaust system for the Polo but the guys at Demon tweeks abvised me against it and there are also serious issues with the spare wheel floor pan. If you want the R32 or Clio 182 look then you will have to cut through the spare wheel floor pan which I didnt want to do.

Powerflow are good exhausts though and well priced

Ben,
User avatar
5509433
Silver Member
Posts: 330
Joined: Mon Aug 10, 2009 10:59 am

Re: Exhaust!

Post by 5509433 »

So, if i cut through the floor plan, then i wouldn't be able to hold a spare wheel.

What about if they cut though it and i use a heap load of heat resistant material to reflect away from the spare wheel?
User avatar
Gary Gee
Bronze Member
Posts: 189
Joined: Mon Jun 08, 2009 1:30 pm
Location: Newcastle Upon Tyne
Contact:

Re: Exhaust!

Post by Gary Gee »

i dont think its the fact it will heat the wheel up its mor the fact u have a big pipe running where it would normally be..
User avatar
red6n2
Bling Bling Diamond Member
Posts: 2090
Joined: Wed Mar 25, 2009 8:51 pm
Location: Northampton

Re: Exhaust!

Post by red6n2 »

looool
Jordy-6n2
Bronze Member
Posts: 153
Joined: Mon Sep 28, 2009 12:13 pm

Re: Exhaust!

Post by Jordy-6n2 »

get them to bend it around the wheel
Post Reply