Anybody got a guide or a PDF file on how to remove the rear bumper?
Thanks
Removing 9N3 Rear Bumper?
-
Karson3270
- Silver Member
- Posts: 298
- Joined: Tue Sep 22, 2009 10:57 pm
- Location: Manchester
Re: Removing 9N3 Rear Bumper?
I would check out the 9n haynes manual as it will be the same.
-
kc
- Gold Member
- Posts: 914
- Joined: Wed Oct 01, 2003 2:03 am
- Drives: an imaginary one... for now
- Location: Up North
Re: Removing 9N3 Rear Bumper?
not got a pdf but....
on each side remove the arch trim, the little black plastic bit with torx, should be 2 iirc... then take out both lights and undo the torx attaching onto body, then undo the torx underneat the bumper. should be about 5
then grab a mate, or if your brave, give it a good tug and it will release and come off its guides...
installation is reversal blah blah lol
on each side remove the arch trim, the little black plastic bit with torx, should be 2 iirc... then take out both lights and undo the torx attaching onto body, then undo the torx underneat the bumper. should be about 5
then grab a mate, or if your brave, give it a good tug and it will release and come off its guides...
installation is reversal blah blah lol