New Member - My Polo 9N3 - Hi !!

[JonnyGriffiths]

Hey Guys,

New member on here, been reading for a few weeks though

Had my polo a year now but decided to start the mods now heres what i plan to do, please feel free to add suggestions etc...

To Do:
Tints - around 80% not full black
H&R 35mm Drop Springs
Forge 007p Dump Valve
K&N Box Filter
MoreBHP Remap (increase hp to 197bhp and increase torque by 65nm)
HIDS4U HID H7 Conversion kit 6000k - Dipped Beam
HIDS4U HID Conversion kit 6000k - Fog Lights - Can anyone tell me what bulb type il need?
White Led Sidelights
LED Festoon Lights for Rear Plates
Alloys Refurbished & Painted - as since buying i have a few scratches etc - either shadow chrome or gun metal - unsure so suggestions welcome // Or replace with Replica Golf Gti Alloys 17"
Also can anyone reccomend any good bulbs for full beam? as white as possible so there isnt a huge difference between my HID's and Full Beam when i flash?

here is a pic of it when i bought it...


Thanks guys

[JonnyGriffiths]

Also referring to the Forge 007p DV - I wanted a nice turbo sound, slight woosh etc, but nothing too drastic that people think there is like an evo or scooby coming up the road doing 100 can anyone give advice if this is the right one? and if so which way to fit it, normal or reverse?

Thanks

[Cam 9n3]

If you want a noise you will have to couple a 007p with an open cone filter, thats the set up i have and does make a nice subtle noise. Id also recommend a non resonated miltek if your after sum note!

[JonnyGriffiths]

Thanks for that... im looking into a cone filter now with cold pipe running to it... anyone got any recommendations on what induction kit / cold air intake kit / cone filter to get?