Polo 1.9Tdi PD130 6 Speed *Car is Sold! :( NEW PICS Pg5*
-
- Silver Member
- Posts: 343
- Joined: Tue Mar 06, 2007 6:11 pm
- Drives: 6c Polo Blue GT
- Location: Edinburgh
Re: My Polo 1.9Tdi PD130 6 Speed *Polo GTI SEATS!!!*
Just read the whole thread and love this wee Polo, Keep up the good work.
Re: My Polo 1.9Tdi PD130 6 Speed *OEM Cruise Control Fitted!!!*
Thanks for the comments guys! Much appreciated.
So i finally managed to install my OEM cruise control. Got the kit from Kufatec in the USA. Cost was R1200 for the kit including shipping and then another R370 for customs.
So all in all R1570. Much, much cheaper than VW.
Had to remove the dashboard to get to the plug on the firewall. Got it coded this morning and it works like a bomb!!!
Pics...
So i finally managed to install my OEM cruise control. Got the kit from Kufatec in the USA. Cost was R1200 for the kit including shipping and then another R370 for customs.
So all in all R1570. Much, much cheaper than VW.
Had to remove the dashboard to get to the plug on the firewall. Got it coded this morning and it works like a bomb!!!
Pics...
Re: My Polo 1.9Tdi PD130 6 Speed *OEM Cruise Control Fitted!!!*
Looks nice! Mate will it be possible for you to write a tutorial or even in details from start to finish please!
Re: My Polo 1.9Tdi PD130 6 Speed *Custom Carbon Overlay!*
Thanks for the comments guys.
Pics of the centre console that Ruan did for me as well as the top dash cubby and Airvents...
I had it done in a Matte carbon. Still thinking if i should change it to gloss or not? What you guys think?
Pics of the centre console that Ruan did for me as well as the top dash cubby and Airvents...
I had it done in a Matte carbon. Still thinking if i should change it to gloss or not? What you guys think?
-
- Silver Member
- Posts: 343
- Joined: Tue Mar 06, 2007 6:11 pm
- Drives: 6c Polo Blue GT
- Location: Edinburgh
Re: My Polo 1.9Tdi PD130 6 Speed *Custom Carbon Overlay*
Looks good, how easy was it to remove the centre consol ? Is it held in by screws or does it just pull off?
Re: My Polo 1.9Tdi PD130 6 Speed *Custom Carbon Overlay*
Verry nice job!!
looks good, i'm also planning on doing that mod.
is it hard to get the carbon foil on?
looks good, i'm also planning on doing that mod.
is it hard to get the carbon foil on?
- Karson3270
- Silver Member
- Posts: 298
- Joined: Tue Sep 22, 2009 10:57 pm
- Location: Manchester
Re: My Polo 1.9Tdi PD130 6 Speed *Custom Carbon Overlay*
I love it. Absolutely stunning. Is it real carbon? If not, where did you get the vinyl from? Absolutely stunning stuff.
-
- New
- Posts: 3
- Joined: Mon May 17, 2010 9:49 pm
Re: My Polo 1.9Tdi PD130 6 Speed *Custom Carbon Overlay*
wow nice one! how did you take off the headlight? also how did u spray the front black? been dyyyyying to do that for ages! did you take that part off and do it? car is looking great!
Re: My Polo 1.9Tdi PD130 6 Speed *STO-Tuning REMAP DONE*
Thanks guys!
Its a carbon foil. Was done by a friend of mine. Centre console is easy to take out. Just a couple of screws.
Headlights were done with a hat gun.
STO-Tuning remap done!!!! Full custom tune baby!! Car feels awesome!
Waiting for Viv's dyno to be up and running which should be this weekend so will update. Will be taking the car to KAR for a dyno as well. Read the details in the STO-Tuning section... http://www.vwclub.co.za/phpbb3/viewtopi ... 3&t=105463
Its a carbon foil. Was done by a friend of mine. Centre console is easy to take out. Just a couple of screws.
Headlights were done with a hat gun.
STO-Tuning remap done!!!! Full custom tune baby!! Car feels awesome!
Waiting for Viv's dyno to be up and running which should be this weekend so will update. Will be taking the car to KAR for a dyno as well. Read the details in the STO-Tuning section... http://www.vwclub.co.za/phpbb3/viewtopi ... 3&t=105463
Re: My Polo 1.9Tdi PD130 6 Speed *STO-Tuning REMAP DONE*
can you add a bit more on how you took out the centre console and vents? the person who owned my car has managed to badly scratch a lot of it and yours looks like a very cool way of sorting it!
Re: Polo 1.9Tdi PD130 6 Speed *63MM DP, Exhaust, Custom Cluster*
63mm DP and exhaust with twin tail pipes
JVC AVX-KW 800 Installed
Then my custom gauge cluster. Gti needles with Silver trim rings. Had to import from germany.
Before:
After:
JVC AVX-KW 800 Installed
Then my custom gauge cluster. Gti needles with Silver trim rings. Had to import from germany.
Before:
After:
- Karson3270
- Silver Member
- Posts: 298
- Joined: Tue Sep 22, 2009 10:57 pm
- Location: Manchester
Re: Polo 1.9Tdi PD130 6 Speed *63MM DP, Exhaust, Custom Cluster*
Very nice! Could you show me the link to the website (if there is one) for the silver trim and needles?
Thanks
Thanks
Re: Polo 1.9Tdi PD130 6 Speed *63MM DP, Exhaust, Custom Cluster*
I have the same car as you weird though because mine came with the cubby hole cover and the black b pillars and chrome dash rings as standard, must be slightly different spec from production line?, are you sure yours is a 130 sport??
Re: Polo 1.9Tdi PD130 6 Speed *63MM DP, Exhaust, Custom Cluster*
My car is not a 130 sport. It is a 1.9Tdi sportline (SOUTH AFRICA). These cars over here come with the PD130 motor and 6 speed gearbox but lack a lot of features you guys (European countries) get.dts wrote:I have the same car as you weird though because mine came with the cubby hole cover and the black b pillars and chrome dash rings as standard, must be slightly different spec from production line?, are you sure yours is a 130 sport??
Rings are from www.tachoringe.de and the needles i bought from the german polo forum.Karson3270 wrote:Very nice! Could you show me the link to the website (if there is one) for the silver trim and needles?
Thanks