Removing rear door card

Chat about your MKV (6N2) Polo
Post Reply
duke750
New
Posts: 38
Joined: Sat Jul 24, 2010 9:29 pm
Location: East London

Removing rear door card

Post by duke750 »

Does anyone know how you do this when you have manual wind down windows? The handle seems to be secure in place.

I've done the front one but the rear speakers are the ones i want out most as they've blown so i'm left half finished doing the job, which is really annoying!

Thanks.
User avatar
RS_GT
Gold Member
Posts: 511
Joined: Wed Mar 03, 2010 9:03 pm
Location: Croydon, South london

Re: Removing rear door card

Post by RS_GT »

duke750 wrote:Does anyone know how you do this when you have manual wind down windows? The handle seems to be secure in place.

I've done the front one but the rear speakers are the ones i want out most as they've blown so i'm left half finished doing the job, which is really annoying!

Thanks.
the winder handle looks solid, but the bit you see is like a cover, put a flat head screw driver just behind it and prise it off, theres a screw behind it, unscrew and your done :D
duke750
New
Posts: 38
Joined: Sat Jul 24, 2010 9:29 pm
Location: East London

Re: Removing rear door card

Post by duke750 »

Thanks, I'll give it a go tomorrow when it's light again. You make it sound too easy though, I was pushing the spacer thing around as quoted by Hayes but that did nothing. Think I've bust it now as it's loose and doesn't sit flush anymore. Tried pulling the handle with all my strength but stupid thing wouldn't budge, this might be something I need help with...
User avatar
RS_GT
Gold Member
Posts: 511
Joined: Wed Mar 03, 2010 9:03 pm
Location: Croydon, South london

Re: Removing rear door card

Post by RS_GT »

duke750 wrote:Thanks, I'll give it a go tomorrow when it's light again. You make it sound too easy though, I was pushing the spacer thing around as quoted by Hayes but that did nothing. Think I've bust it now as it's loose and doesn't sit flush anymore. Tried pulling the handle with all my strength but stupid thing wouldn't budge, this might be something I need help with...
Thats what i tried first after looking in the Haynes, but my spacer thing is literally just a spacer, no mechanism inside it. i was squeezing it yanking it about but nothing. just flip the cover off the actual handle then unscrew it, simple stuff...but if you need help with anything, just pop down, more than willing to help :)
Post Reply