ok ive got an 05 1.2 Polo 9n3 and its ticking over very rough and the engine sounds a but rattly and if i keep it ticking over for a while the orange light comes on and it missfires!
ive changed the plugs and the middle cylinder coilpack
any ideas?
HELP Please Polo 9n3
Re: HELP Please Polo 9n3
i believe this happens when your car wants a 20vT conversion , sorry, i dont know really
hows ya doing ste, long time no speak
hows ya doing ste, long time no speak
Re: HELP Please Polo 9n3
haa how helpful jeff lol
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: HELP Please Polo 9n3
Id get it vag-com'd. A fault like this will be logged by the ECU
-
- Bronze Member
- Posts: 164
- Joined: Tue Jan 31, 2006 7:44 pm
- Location: Darwen, Lancs Drives: Polo mrk 7 1.2S
- Contact:
Re: HELP Please Polo 9n3
hmmm aint got 20v money im affraid.....
anyway ive bought another bmd code engine im on with fitting it now
anyway ive bought another bmd code engine im on with fitting it now
Re: HELP Please Polo 9n3
Could be the old sticky valves m8.. very common problem on the 1.2 6v engines
i did have the BMD engine and kno of others who did aswell..
had to strip the top end down.. head off.. set of new valves, grind them in good,, get it sparkling with a new head gasket and stuff n build back up.. should be minted
i did have the BMD engine and kno of others who did aswell..
had to strip the top end down.. head off.. set of new valves, grind them in good,, get it sparkling with a new head gasket and stuff n build back up.. should be minted