Finding a gti rear valance/rear bumper?

[MODDED9N]

As the title says, I am looking for a gti rear valance or gti rear bumper? Anyone got one for sale of knows where I can get one? Cheers

[zedzo]

there only 30 40 quid from dealers mate.

[MODDED9N]

U got the part number zed? Cheers

[matt_123]

part no. would help ive been looking for this too. and does it need a fitting kit?

[blazeguarder]

Polo9n.info

The part number appears to be 6Q6 807 521 A 9B9.
Shouldn't need a fitting kit, its only the lower valance...

[zedzo]

hes sorted the part number, i didnt bother i just went in and asked for it, you unclip the bottom piece of ur old one n push in the new one. just clips. no fitting brackets or anything like that. dont need to remove ur bumper either.

[polo1.9TDI SPORT]

I had a look at mine yesterday, want ot get the rear valance off and painted ya see.
Mine looks like is bolted on from inside the wheel arch?
Anyone have any pics or anything, i dont want rip it off and realise ive broken it.

Got a 1.9 TDI so a rear valance in need of some life!!

[matt_123]

there are 3 screws on the bottom underneath by the exhaust and then undo the first 3 of the wheel arch liner is what i done, and then pull at one end and it all pops off sorted!!

I might have a gti rear valance up for sale if anyone is interested? unused and new.

[MODDED9N]

SHOTGUN! HOW MUCH YOU WANT FOR THE VALANCE???

[polo1.9TDI SPORT]

Cheers Matt!!

Will have a look over weekend, anyone know what torx i need, ive lost all mine need new ones!!

How much for the valance and postage?

[zedzo]

small size. 25 i think dont really remember though

[polo1.9TDI SPORT]

Cheers for that,

Got me some tx/torx keys now and rear valance will be coming off either today or tomoorw. Driving around next week without it until i have finished priming and painting it! Pics up when done!

[MODDED9N]

where did you get your valance from???? ha

[polo1.9TDI SPORT]

Just checked current prices from vw for the gti valance and it costs - £50.13 inc VAT.

And i cant get the valance off, any ideas anyone?

Ive undone the bolt in each wheel arch at the bottom, undone the 3 screws - two by exhaust and one on the right by the tow hook.

But its like clipped in the wheel arch or something, i cant get the bloody thing off from there. checked the polo9n3 forum with pictures but its not very clear on the pulling off bit.

Ta

Dave

[zedzo]

if youve removed all the screws it needs unclipping now start from side which is the hard bit then it ll come out easy towards the middle. if you can luk behind it you can push out clips with a flat screw driver