Was carbon wrapping- now my thread! New pics!
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Was carbon wrapping- now my thread! New pics!
PICS DOWN BELOW!!!
Got a carbon wrapped badge off Tim_GTI (Cheers for that!):
Got some carbon wrap of ebay and did my mirrors:
Then finished up with my inserts on my steering wheel:
The mirror was an absolute effort to start off with them got easy!
Just did my air vents, looks sick!
Got a carbon wrapped badge off Tim_GTI (Cheers for that!):
Got some carbon wrap of ebay and did my mirrors:
Then finished up with my inserts on my steering wheel:
The mirror was an absolute effort to start off with them got easy!
Just did my air vents, looks sick!
Last edited by MODDED9N on Fri Apr 15, 2011 10:16 pm, edited 3 times in total.
Re: Had a day of carbon wrapping
That looks very good!!
I would prefer to get some on my air vents, is it a hazel?
I would prefer to get some on my air vents, is it a hazel?
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Had a day of carbon wrapping
I am doing my air vents later 
Re: Had a day of carbon wrapping
have a look at my air vents mate for an idea of how it'll look
and you pics dont work for me in a new tab
i wana see your mirror caps... lol what was your techers to do it? hairdryer?
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Had a day of carbon wrapping
You have an email address I can send them too? They look very nice 
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Had a day of carbon wrapping




Last edited by MODDED9N on Mon Apr 04, 2011 12:10 am, edited 2 times in total.
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: Had a day of carbon wrapping- PICS WORKING NOW
Looks awesome mate!
This is becoming quite a fashion! It does instantly transform crap plastic
Do you have to remove the steering wheel inserts to do this?
This is becoming quite a fashion! It does instantly transform crap plastic
Do you have to remove the steering wheel inserts to do this?
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Had a day of carbon wrapping- PICS WORKING NOW
Cheers Tim
Yes you do have to take out the steering wheel inserts if u want the best job but they simply just pop out cos they are just clipped in to a rubber mould so you dont have to worry about breaking any clips
And it is just an instant transformation eh!
Re: Had a day of carbon wrapping- PICS WORKING NOW
loooks good!
. how hard was it to do the wing mirrors?
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Had a day of carbon wrapping- PICS WORKING NOW
On a scale of 1 to 10 i would say about 7! To be honest, just use a hair dry or a head gun and it makes it very easy as it makes it more malleable and easy to shape!! Was easy at the end 
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Carbon wrap should be a controlled substance!
actually make it a 4 with 1 being plug your headphones into an ipod and 10 being fitting tank tracks to a 9n3 hahah.....
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: Carbon wrap should be a controlled substance!
Have you got a better picture of the bottom of your grills?
I'm sizing mine up and not sure what to do where there's a slight indent and the white logos for the vent control are displayed. I've notice you've kept yours visible but can't work how what you've done by those pictures. Do you cut specific holes for them?
I'm sizing mine up and not sure what to do where there's a slight indent and the white logos for the vent control are displayed. I've notice you've kept yours visible but can't work how what you've done by those pictures. Do you cut specific holes for them?
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Carbon wrap should be a controlled substance!
Send me yours and I will do it for you


- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: Carbon wrap should be a controlled substance!
Thanks for that.
Nah it's cool man I love abit of DIY
thanks for the offer though
Nah it's cool man I love abit of DIY
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Carbon wrap should be a controlled substance!
Doing centre console tonight if time permits 


