Few Snaps From Tonight

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
matt_123
Gold Member
Posts: 745
Joined: Sun Dec 21, 2008 7:27 pm

Re: Few Snaps From Tonight

Post by matt_123 »

thats alright tim, cheers liking your new polo btw 8)
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Few Snaps From Tonight

Post by Tim_GTi »

matt_123 wrote:thats alright tim, cheers liking your new polo btw 8)
Thanks mate 8)

Can you remove the inserts on the steering wheel then?

And what did you use to re-secure the pillars (assuming you have to take them off to put the tape on?)
User avatar
Gtimatt
Silver Member
Posts: 286
Joined: Thu Dec 24, 2009 5:05 pm
Location: west sussex
Contact:

Re: Few Snaps From Tonight

Post by Gtimatt »

Tim_GTi wrote:
matt_123 wrote:thats alright tim, cheers liking your new polo btw 8)
Thanks mate 8)

Can you remove the inserts on the steering wheel then?

And what did you use to re-secure the pillars (assuming you have to take them off to put the tape on?)
Steering wheel inserts just pull off. For the pillars you have to remove the window lining running along the pillar and you will see 2 screws just undo them and it slides straight off
matt_123
Gold Member
Posts: 745
Joined: Sun Dec 21, 2008 7:27 pm

Re: Few Snaps From Tonight

Post by matt_123 »

yeah at Gtimatt said , B pillars just screw on with two screws so pull back the rubber lining and ull find the two screws up do them and itll slide off sideways, also put a cloth of something to stop the screws from going down into the door car bit as you may drop them I did but luckily put a cloth there :roll:
and the inserts just pull out, simples.
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Few Snaps From Tonight

Post by Tim_GTi »

Thanks for the info guys!
Post Reply