Would Alloys from a 2011 Polo fit a 9N?

Fannon · Post by **Fannon** » Tue Apr 12, 2011 6:24 pm

Just wondering if alloys from a 2011 Polo would fit a 2005 Polo 9N? 5 Stud with tyre size 165/55 R15.

Found a new 2nd hand set for a pretty good price with new tyres and wondering if they would fit, cheers.

Fannon · Post by **Fannon** » Tue Apr 12, 2011 8:50 pm

Anyone?

zedzo · Post by **zedzo** » Tue Apr 12, 2011 10:57 pm

there all 5x100 n so should fit yes.

Fannon · Post by **Fannon** » Wed Apr 13, 2011 10:21 am

Thank you!

K.I.T.T. · Post by **K.I.T.T.** » Wed Apr 13, 2011 1:12 pm

Tyres are he wrong profile. They should be either 195/50/15 or 195/55/15. Look at the sticker stuck inside the fuel filler cap.

Ash

Fannon · Post by **Fannon** » Wed Apr 13, 2011 4:28 pm

I just copied it from the ebay auction Ash, they must have mistyped the tyre size! Thanks for pointing that out!

Stuart

g__humm · Post by **g__humm** » Thu Apr 14, 2011 9:01 am

Aren't new dubs 5x112? I thought they were if so then u will need adaptors

Fannon · Post by **Fannon** » Thu Apr 14, 2011 9:08 am

I really need to know, iv been searching on sites and on all the alloy sites it just asks if its a 5 or 4 stud. Nothing about 5x100 or 5x112 or anything.

Fannon · Post by **Fannon** » Thu Apr 14, 2011 9:11 am

Got this from the wolfrace website:

Make: VOLKSWAGEN Model: POLO: Year: 09 - PCD: 5x100 Offset: 43>
Bore: 57.1 Fittings: M14x1.5 Recommended: 175/70R14

Ignore the tyre size, but it says the pcd is 5x100 which should be fine eh guys?

JoshGTI · Post by **JoshGTI** » Thu Apr 14, 2011 9:49 am

Et43 is a bit high for a 9N. You would need to run spacers. Might run ok but would sit back in the arch a bit more.

Fannon · Post by **Fannon** » Thu Apr 14, 2011 10:26 am

That ET43 is just from the wolfrace website, when you put in a 9n 2005 it comes up the same ET.

UK-POLOS.NET - THE VW Polo Forum