Would these fit?

Discuss Suspension, Brakes, Wheels and Tyres
Post Reply
Tahrey1043
Bling Bling Diamond Member
Posts: 5184
Joined: Thu Sep 18, 2003 1:15 am
Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
Contact:

Would these fit?

Post by Tahrey1043 »

:lol: This is in the realm of what-if pipedreams... and larceny.

So, I get to drive the works Astra Estate for a day. It's a total slug, and has no driver feedback whatsoever, but quite comfy and smart. I notice it has reasonable (if hideously dirty) 6-spoke alloys on. 4-stud alloys. 195/55 R15s to be precise.

If I were to borrow them for a day (take ownership of it, drive off and work til lunch, then reunite with the polo at break time, scrub & temporarily swap wheels for a quick photo shoot ;) ), or just pick some similar ones up cheaply somewhere and modify the centre caps, would vaux 15-inch wheels with 195/55 rubber have any chance of fitting? Or just a bit too big, with kooky offsets?
I dunno... they're subtle... but smart in a back-to-basics fashion.

Mk3 hatch btw ;)
Speedlaw
Moderator
Posts: 2852
Joined: Wed Nov 27, 2002 11:04 am
Location: Netherlands
Contact:

Post by Speedlaw »

Erm, I think the Vaux centre bore is too narrow. The PCD will be fine (4x100) and the offset will ok (too high, but so what) - but the centre bore...

Think it's 56mm instead of 57,something.

I'll look around.

:D
4paws
Bronze Member
Posts: 247
Joined: Wed May 19, 2004 7:59 pm
Location: scotland/glasgow

Post by 4paws »

i think ur right speedlaw
my cousin had to bore out the centre to fit vauxhall alloys to her polo have to say it looks ok though :wink:
Speedlaw
Moderator
Posts: 2852
Joined: Wed Nov 27, 2002 11:04 am
Location: Netherlands
Contact:

Post by Speedlaw »

Ah right. Well there you go then.

8)
Tahrey1043
Bling Bling Diamond Member
Posts: 5184
Joined: Thu Sep 18, 2003 1:15 am
Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
Contact:

Post by Tahrey1043 »

Don't knacker yourself looking for an answer though, if i was ever to have the opportunity to "borrow" I'd probably bottle it.. :D (and like i could realistically afford alloys before 2005?)

Following those details though, might try putting my 155/70s on the Astra though :lol: :lol: .... it could do with a bit of a gearing reduction. (hey... that could work... it'd be like fitting mine with a 4.47 final instead of the 4.06... muchos acceleratos..)

My hubs are a bit battered anyway, I bet I could squoosh them on. Might be a trouble getting 'em in under the rear arches though. Suspension isnt dropped (so front would be fine) but the rear is saggy.
Post Reply