Ive been told that to fit Lamin-X to the 9n3 headlights its quite tricky and requires specific tools.
Does anyone know of/ or themselves fit Lamin-X near Cardiff, Wales area?
Thanks
Dan
Lamin X - Any people fit it?
- lukey GTI
- Silver Member
- Posts: 371
- Joined: Mon May 16, 2011 10:38 am
- Location: huddersfield
- Contact:
Re: Lamin X - Any people fit it?
think window tinting people would do this ...ring around a few of ur local tint shops n ask .... something i mite look at soon
Re: Lamin X - Any people fit it?
just need a hair dryer or a heat gun which makes it soft and a acraper type thing to mould it round the headlight and make the Lamin-X stick lol. I tried to lamin X my rear lights all red once upon a time and that I found was hard so didnt attempt it again after wasting it. but Ive done a mates headlights before and they were considerably easier
Re: Lamin X - Any people fit it?
done my foglights yellow and used a hairdryer , no problem once the laminx is hot
- duffman502
- Bronze Member
- Posts: 100
- Joined: Wed Aug 05, 2009 10:39 am
Re: Lamin X - Any people fit it?
Did it myself the first time on my 9n gti headlights made a right hash of it and took it off in a couple of days. Then did it on my 6r polo i removed the headlight and made a template out of a big peice of card. Then cut the lamin-x to the same shape didnt try the hairdryer but would imagine it would help. just take your time and its not too painful.
- lukey GTI
- Silver Member
- Posts: 371
- Joined: Mon May 16, 2011 10:38 am
- Location: huddersfield
- Contact:
Re: Lamin X - Any people fit it?
there's a discount code for lamin-x http://www.uk-polos.net/view ... 47&t=38736