Black Polo GTI 6 Speed. 390 BHP Build

[drennan]

Lookn good so far. Some solid foundations by the looksa it i want 1. Am thinkn gti tartain and do my gaiter aswell if it doesnt match the seats or plastic.... And if i can source the tartan again.missed out last time

[tt509]

looking good mate

[9N3 Turbo]

looking good mate

Thanks mate

[9N3 Turbo]

Lookn good so far. Some solid foundations by the looksa it i want 1. Am thinkn gti tartain and do my gaiter aswell if it doesnt match the seats or plastic.... And if i can source the tartan again.missed out last time

Cheers mate.

[9N3 Turbo]

9N3 Turbo, looking at these pictures, it seems that you have a problem with the rear brake assemblies on your car, that equaliser bar should not be tilted to one side if both callipers are working correctly - maybe you should consider doing the "SHARAN return spring" mod.

Thanks for points this out.

It's due to something i did when changing the pads.

I am in the process of changing to 256mm rears which will sort it all out.

[RUM4MO]

Ah, I see, I fitted external return springs to my wife's Polo 9N years ago after getting fed up with frequently needing to "re-zero" the O/S calliper piston to stop that side from dragging a bit. If you have not fitted external return springs to your car, then maybe consider doing that, I'd think if you look under the car with the handbrake lever fully "off" - you will find that one of the levers (on the rear callipers) is not sitting back on its stop - they should both rest on their stops when the handbrake is "off". The only "downside" to doing this mod is that unless you are stationary on proper level ground, then the car will move if the handbrake is not on - but that is how things are meant to be, ie low drag = better performance!

I've always wanted to fit an arm rest, but its wife's car and she does not want anything in her way! (I did fit a cubby box to it when it was only one year old - and she does not like that either - "now I've lost a place to put things in!" - also she did not notice the sun glasses holder that I fitted for my sun glasses!)

[9N3 Turbo]

Ah, I see, I fitted external return springs to my wife's Polo 9N years ago after getting fed up with frequently needing to "re-zero" the O/S calliper piston to stop that side from dragging a bit. If you have not fitted external return springs to your car, then maybe consider doing that, I'd think if you look under the car with the handbrake lever fully "off" - you will find that one of the levers (on the rear callipers) is not sitting back on its stop - they should both rest on their stops when the handbrake is "off". The only "downside" to doing this mod is that unless you are stationary on proper level ground, then the car will move if the handbrake is not on - but that is how things are meant to be, ie low drag = better performance!

I've always wanted to fit an arm rest, but its wife's car and she does not want anything in her way! (I did fit a cubby box to it when it was only one year old - and she does not like that either - "now I've lost a place to put things in!" - also she did not notice the sun glasses holder that I fitted for my sun glasses!)

Thanks fella.

Will certainly look into this.

lol @ I've always wanted to fit an arm rest, but its wife's car and she does not want anything in her way! (I did fit a cubby box to it when it was only one year old - and she does not like that either - "now I've lost a place to put things in!" - also she did not notice the sun glasses holder that I fitted for my sun glasses!)

[drennan]

Anyone speek chinese lol? Had a wee scope about the net and ebay.cn to see if i could find it. Even downloaded a chinese translater but no luck defo lookn to buy this 1 if i can get it

[9N3 Turbo]

Mate you best bet is to contact Beijing polo off here and see if he would be willing to get it and send over for you as he did for me.

[drennan]

Aye mite do this cheers man!

[Simon90]

Get a group buy going mate I'm sure there will be enough people game for it

[beijing polo]

Anyone speek chinese lol? Had a wee scope about the net and ebay.cn to see if i could find it. Even downloaded a chinese translater but no luck defo lookn to buy this 1 if i can get it

lol, i do! i see there is some interest in the armrests, so i will set up a group buy in another thread.
sorry for hijacking your thread junior

ps. that was a good write-up

[9N3 Turbo]

Anyone speek chinese lol? Had a wee scope about the net and ebay.cn to see if i could find it. Even downloaded a chinese translater but no luck defo lookn to buy this 1 if i can get it

lol, i do! i see there is some interest in the armrests, so i will set up a group buy in another thread.
sorry for hijacking your thread junior

ps. that was a good write-up

No problem.

Now we can all have a great armrest lol

[beijing polo]

Anyone speek chinese lol? Had a wee scope about the net and ebay.cn to see if i could find it. Even downloaded a chinese translater but no luck defo lookn to buy this 1 if i can get it

lol, i do! i see there is some interest in the armrests, so i will set up a group buy in another thread.
sorry for hijacking your thread junior

ps. that was a good write-up

No problem.

Now we can all have a great armrest lol

but you will still be my first lol

[9N3 Turbo]