Spraying side skirts
-
lee gti 88
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
Spraying side skirts
Hi I'm thinking of spraying my side skirts after doing the plastic trim on the back bumper. My only question is, will it chip off? any one done this before and got any tips? I was thinking several coats of laquer?
-
gti-joe
- Silver Member
- Posts: 343
- Joined: Tue Mar 06, 2007 6:11 pm
- Drives: 6c Polo Blue GT
- Location: Edinburgh
Re: Spraying side skirts
Got mine done professionally, detextured and painted gloss black. Been through this Scottish winter and look as good as when they were done.
-
lee gti 88
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
Re: Spraying side skirts
Cheers Joe, do you have any idea how they did it? im not too fussed about the texture just dont want loads of paint chips off the front wheels 
-
gti-joe
- Silver Member
- Posts: 343
- Joined: Tue Mar 06, 2007 6:11 pm
- Drives: 6c Polo Blue GT
- Location: Edinburgh
Re: Spraying side skirts
Sorry dont know how they did it.
Spraying side skirts
I take it the skirts are plastic? If so.... Rub them down with 400 grit paper. Give it 2 coats of plastiprime (plastic primer) , then rub the primer down with 1000 grit wet n dry. Then few coats of base coat (colour) then blast it with a good few coats of lacquer. Hope this helps in some way.
-
lee gti 88
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
Re: Spraying side skirts
Cheers guys, I'll give it a go at some point 