S3 mods

[shawnged]

Could have the chance of some parts off my mates S3 speaking engine and power terms not really much idea about it just he mention some parts are straight swap and make alot of difference to performance! Any of you fine chaps shed some light on this with figures and reliability issues etc etc? Thanks

[buzzmotorsport]

If it was me id be taking the seats to start with

And then the K04 turbo... manifold.. and injectors!


Alex

[9N3 Turbo]

you'll also need the MAF and will need a 4bar fuel pump from a Seat Leon Cupra R

[Joz]

Brakes

[shawnged]

Cheers for the lowdown chaps fingers crossed my mate gets another BAM engine.

[Instigator]

the K04-023 from a S3 does not fit... the in/outlet of the turbo are opposite of oure turbo's.
and there is not enough room to fit them.

injectors etc could be used, but be sure they are 100% otherwise it can give you alot of misery

[Simon90]

I know a bloke who's fitted the k04 off an S3

Lot of work don't get me wrong but it's on there!

[9N3 Turbo]

the K04-023 from a S3 does not fit... the in/outlet of the turbo are opposite of oure turbo's.
and there is not enough room to fit them.

injectors etc could be used, but be sure they are 100% otherwise it can give you alot of misery

It does fit

[shawnged]

Alot of people saying that the abs is in the way when fitting the ko4! Does anybody have contact details to someone that has actually fitted the turbo to our polos?? I've just recently put a milltek turbo back on my car would putting the turbo on mean i have to change the down pipe??

[9N3 Turbo]

Yes you would have to change the down pipe.

They guys having problems with the ABS are left hand drive.

It will fit our right hand drive car no problem at all.