6R Polo GTI hybrid WMI project

Chat about your 6R/6C model Polos here!
User avatar
Hurdy
Silver Member
Posts: 455
Joined: Sun Jun 12, 2011 10:55 am

Re: 6R Polo GTI hybrid WMI project

Post by Hurdy »

gavs wrote:Not APR Australia. 7spd DSG mappin is now available for around $915 AUD. It's a full software program that does some of the following:
1st gear will now change up at a higher rpm to stop engine labour and to help stop clutch slip.
2nd also increased.
D mode is also a bit more spritely.
S is made less manic.
M is proper manual control!
That is the Harding performance software isn't it Gavs? I texted them and they only do it in Aus.
gavs
Silver Member
Posts: 329
Joined: Wed Mar 09, 2011 1:39 am

Re: 6R Polo GTI hybrid WMI project

Post by gavs »

Yep, Harding performance are APR Australia.

Not sure the caper though but you might actually have to run APR ecu tuning also for them to do it..... Plus they now have upgraded clutch packs for the DSG too so I'm not sure what the go is.... Maybe it needs doing as a whole package.
User avatar
BBBaboonface
Bronze Member
Posts: 147
Joined: Sun Sep 02, 2012 12:48 am
Location: Chesterfield

Re: 6R Polo GTI hybrid WMI project

Post by BBBaboonface »

Bit late in the game to be posting now, but really enjoyed reading the thread. Stunning cars, mods, and knowledge to make it all possible, awestruck :shock: !
All the best with the new project, i think we all know thats going to be off the cool scale too! 8)
User avatar
Hurdy
Silver Member
Posts: 455
Joined: Sun Jun 12, 2011 10:55 am

Re: 6R Polo GTI hybrid WMI project

Post by Hurdy »

Just catching up on here. Some really nice 6R's on here now 8)

The golf R is coming along. Recently took it to Santa Pod and it did a 12.6 standing 1/4.

Here's a quick video for those interested. The Bocanegra I raced was running well and has the same engine, box and suspension as the Polo GTI. The one I raced had a fair few mods too.



and a snapshot of the end of the video'd run....
Image
tt509
Gold Member
Posts: 810
Joined: Sun Mar 23, 2008 3:27 pm

Re: 6R Polo GTI hybrid WMI project

Post by tt509 »

cool
User avatar
kawabanga
Getting There!
Posts: 72
Joined: Thu Mar 08, 2012 9:09 pm
Location: Italy, Piemonte

Re: 6R Polo GTI hybrid WMI project

Post by kawabanga »

Hurdy, in the link below is not for sure a good way to threat the DSG7, but taking an approximate measure on 0-100 Km/h it seems a good time for a stock GTI...!

Have you ever tried this?

User avatar
Hurdy
Silver Member
Posts: 455
Joined: Sun Jun 12, 2011 10:55 am

Re: 6R Polo GTI hybrid WMI project

Post by Hurdy »

I've tried launching a " few" times. Never launched from 4000 rpm though!
User avatar
kawabanga
Getting There!
Posts: 72
Joined: Thu Mar 08, 2012 9:09 pm
Location: Italy, Piemonte

Re: 6R Polo GTI hybrid WMI project

Post by kawabanga »

Hurdy, you surely know if our Polo has those rear weights as in the Fabia...
http://www.briskoda.net/forums/topic/22 ... tch-guide/

May be the weights are installed on the Fabia just because they have the battery inside the engine bay?
User avatar
Hurdy
Silver Member
Posts: 455
Joined: Sun Jun 12, 2011 10:55 am

Re: 6R Polo GTI hybrid WMI project

Post by Hurdy »

There are no weights on the rear bar of the GTI 8)
Post Reply