rear spring question

david burton · Post by **david burton** » Mon Jul 12, 2004 9:36 pm

hello

I've put a set of lowring springs on my motor, and whilst the front of the car is at the perfect height for me, the rear still sits about an inch too high - I've had them on for a few months and there's been a lot of weight in it too.

Anybody else find this problem? I'm very tempted to whip the struts off and cut 1/4 of a turn of coil off the springs

any objections?

benny_polo · Post by **benny_polo** » Thu Jul 15, 2004 4:46 pm

i got the same problem with mine front is lower then the rear

..
the only (correct) way round this is too get sightly lower spring for the rear.
cutting the springs down is an M.O.T failure