Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Chat about your MKV (6N2) Polo GTi
Samuel434
Getting There!
Posts: 51 Joined: Tue Nov 13, 2012 10:06 pm
Location: South London/West Sussex/Kent
Post
by Samuel434 » Tue Mar 05, 2013 9:14 pm
Did I mention it came with heated leathers
Got some plans for these when the funds are available
Samuel434
Getting There!
Posts: 51 Joined: Tue Nov 13, 2012 10:06 pm
Location: South London/West Sussex/Kent
Post
by Samuel434 » Sat Mar 09, 2013 9:53 am
These arrived this morning
Went for these instead of the more common ABT ones. Still waiting for my plates!!!
Moosegirl
Gold Member
Posts: 679 Joined: Tue Aug 02, 2011 7:45 pm
Location: Newcastle Upon Tyne
Contact:
Post
by Moosegirl » Sat Mar 09, 2013 4:00 pm
Same interior as mine. Awesomeness!
Samuel434
Getting There!
Posts: 51 Joined: Tue Nov 13, 2012 10:06 pm
Location: South London/West Sussex/Kent
Post
by Samuel434 » Sun Mar 10, 2013 10:09 am
Moosegirl wrote: Same interior as mine. Awesomeness!
*highfive*
I looked for about 2 months until I found this one to buy lol.
Samuel434
Getting There!
Posts: 51 Joined: Tue Nov 13, 2012 10:06 pm
Location: South London/West Sussex/Kent
Post
by Samuel434 » Sun Mar 10, 2013 11:53 am
Does that look right? The green cap on the vacuum pipe... I replaced it after my clutch was done, and for a few miles it stopped the judder in 1st accelerating. Now it is back again, and I am wondering if this is installed properly?
Moosegirl
Gold Member
Posts: 679 Joined: Tue Aug 02, 2011 7:45 pm
Location: Newcastle Upon Tyne
Contact:
Post
by Moosegirl » Sun Mar 10, 2013 12:49 pm
Samuel434 wrote: Moosegirl wrote: Same interior as mine. Awesomeness!
*highfive*
I looked for about 2 months until I found this one to buy lol.
Haha. I had to go from Newcastle to Wales and back in a day to get mine aswell lol.
Samuel434
Getting There!
Posts: 51 Joined: Tue Nov 13, 2012 10:06 pm
Location: South London/West Sussex/Kent
Post
by Samuel434 » Sun Mar 10, 2013 2:52 pm
Moosegirl wrote: Samuel434 wrote: Moosegirl wrote: Same interior as mine. Awesomeness!
*highfive*
I looked for about 2 months until I found this one to buy lol.
Haha. I had to go from Newcastle to Wales and back in a day to get mine aswell lol.
Ouch! I only had to skip across a few post codes. Is yours getting repaired?
Moosegirl
Gold Member
Posts: 679 Joined: Tue Aug 02, 2011 7:45 pm
Location: Newcastle Upon Tyne
Contact:
Post
by Moosegirl » Sun Mar 10, 2013 3:49 pm
Haha. Yeah it is getting repaired, just waiting for a cheque from the other guys insurance then i can get started
Samuel434
Getting There!
Posts: 51 Joined: Tue Nov 13, 2012 10:06 pm
Location: South London/West Sussex/Kent
Post
by Samuel434 » Sun Mar 10, 2013 7:45 pm
Moosegirl wrote: Haha. Yeah it is getting repaired, just waiting for a cheque from the other guys insurance then i can get started
Hope that doesn't take too long, I'd hate to be without my Git <-- (correct spelling). I feel your pain!
Moosegirl
Gold Member
Posts: 679 Joined: Tue Aug 02, 2011 7:45 pm
Location: Newcastle Upon Tyne
Contact:
Post
by Moosegirl » Mon Mar 11, 2013 3:32 pm
Samuel434 wrote: Moosegirl wrote: Haha. Yeah it is getting repaired, just waiting for a cheque from the other guys insurance then i can get started
Hope that doesn't take too long, I'd hate to be without my Git <-- (correct spelling). I feel your pain!
Hahaha
Samuel434
Getting There!
Posts: 51 Joined: Tue Nov 13, 2012 10:06 pm
Location: South London/West Sussex/Kent
Post
by Samuel434 » Tue Mar 12, 2013 9:16 pm
Moosegirl wrote: Samuel434 wrote: Moosegirl wrote: Haha. Yeah it is getting repaired, just waiting for a cheque from the other guys insurance then i can get started
Hope that doesn't take too long, I'd hate to be without my Git <-- (correct spelling). I feel your pain!
Hahaha
I'll keep an eye on ya thread too see how it'sw going for ya. Hope it goes ok!
Moosegirl
Gold Member
Posts: 679 Joined: Tue Aug 02, 2011 7:45 pm
Location: Newcastle Upon Tyne
Contact:
Post
by Moosegirl » Tue Mar 12, 2013 9:37 pm
Thanks
I'll keep an eye on this one too
Samuel434
Getting There!
Posts: 51 Joined: Tue Nov 13, 2012 10:06 pm
Location: South London/West Sussex/Kent
Post
by Samuel434 » Wed Mar 13, 2013 7:24 pm
Think my wheel bearing has gone, and the clutch (although new) is being a bastard, and it is really hard to get into gear once warmed up... I hope it isn't the dreaded... GEARBOX! There I said it. Oh no
Am going to put things on hold until I get her running sweet tbh, rather ahve a car that gets me around than a car that looks pretty and doesn't drive lol
alexperkins
Site Admin
Posts: 14866 Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:
Post
by alexperkins » Thu Mar 14, 2013 12:03 pm
It could be that the linkage is misadjusted. They are very fragile on the polo, and even just a millimetre out will cause all hell with shifting.
Lloydiexx
Bronze Member
Posts: 187 Joined: Fri Oct 28, 2011 1:26 pm
Location: Cornwall
Post
by Lloydiexx » Thu Mar 14, 2013 6:58 pm
Lloydiexx wrote: Yay another Black one on here, Welcome and look forward to seeing your progress and updates
Thank you
I want your seatbelts Lloydie! Where did ya get ya plates from? I'm thinking that mine will never arrive
As the weather gets better and better the progress will keep coming
[/quote]
Lol I will never seell my seatbelts haha! it took me long enough to find them
just keep looking on eBay thats what I did and I got a bragain! my plates came from a garage in exeter the previous owner put them on. I need to get some new ones made up soon as mine have got scratched :/