noise on full lock

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
Lukeygower
Getting There!
Posts: 80
Joined: Mon Nov 26, 2012 3:33 pm
Location: essex

noise on full lock

Post by Lukeygower »

When you turn the car on full lock you get a kind of crunching noise, i didnt know if this was because of the diff in the box or micanical. Also when taking a corner turning left only you get a squeeking noise but only from front drivers wheel but when you slightly touch the brake it stops, could this be dry CV joint on the shafts??
Crippin
Bronze Member
Posts: 223
Joined: Tue Jan 24, 2012 9:34 pm

Re: noise on full lock

Post by Crippin »

Possibly the s**t guard for breaks hitting wishbone. That's what mine was anyways.
Lukeygower
Getting There!
Posts: 80
Joined: Mon Nov 26, 2012 3:33 pm
Location: essex

Re: noise on full lock

Post by Lukeygower »

Yeh i didnt think of that it only clonk's about 3 or 4 times and you dont hear it again but it dont do it if your going in a straight line only on full lock. Ill get it on the ramp the weekend and try to figure out what it is
quinnygti
Bronze Member
Posts: 198
Joined: Fri Jul 29, 2011 9:17 pm
Location: Peterborough

Re: noise on full lock

Post by quinnygti »

Mine does it only on full lock only started doing it after I had lowered it on h and r springs checked bushes all suspension reckon it might be anti roll bar bushes need to investigate further
Lukeygower
Getting There!
Posts: 80
Joined: Mon Nov 26, 2012 3:33 pm
Location: essex

Re: noise on full lock

Post by Lukeygower »

Ill order some just to be on the safe side if that dont fix it ill try top mounts.
Lukeygower
Getting There!
Posts: 80
Joined: Mon Nov 26, 2012 3:33 pm
Location: essex

Re: noise on full lock

Post by Lukeygower »

Where can you get the bushes from is it dealer only i can only seem to find whole roll bar kits
Post Reply