done some more work to the old gal, getting near to putting engine all back together now.
i managed to get my hands on a gearbox in the end, all free and off a valver.
cleaned it and test fitted it so i could do a little wiring.
i welded up the hole in the floor
been sanding the block down for respraying, cleaning and fitting the spacer plate and flywheel.
and just a few of the engine quickly built up.
just doing some little bits that need doing for the engine.
started sanding alt and steering pump holder ready to polish.
crank seal plate has been cleaned and new seal fitted.
some more polishing on the engine mount to finish off.
been cleaning the steering pump and need to prep the crank pulley for powder coating.
gunna be painting the gearbox and engine block soon so will post an update as soon as these are done
cheers for looking guys.
transformation from scrapper to euro 6n polo
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: transformation from scrapper to euro 6n polo
Love these updates! B)
- 6N2 GTI 00
- Bling Bling Diamond Member
- Posts: 4143
- Joined: Mon Dec 08, 2008 9:20 am
- Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!
Re: transformation from scrapper to euro 6n polo
Loving this build thread attention to detail is awesome
-
- New
- Posts: 37
- Joined: Sun Jul 19, 2009 9:09 pm
Re: transformation from scrapper to euro 6n polo
Just found this thread, unreal ammount of work gone into this, hats off to you, I run a 9N but I'm thinking of getting a 6N as a toy, on the browse for inspiration but been completely blown away by your transformation
Re: transformation from scrapper to euro 6n polo
all sprayed
start putting the engine back together now yey!
start putting the engine back together now yey!
-
- New
- Posts: 16
- Joined: Mon Nov 12, 2012 6:12 pm
- Location: Bromley, Kent, London
Re: transformation from scrapper to euro 6n polo
Hi just looked at this thread, have to say really amazing what you have done, have you any more pic of how it looks now? would love to see.
-
- Bronze Member
- Posts: 111
- Joined: Thu May 24, 2012 9:22 pm
- Location: Sheffield, South Yorkshire
Re: transformation from scrapper to euro 6n polo
soo much attention to detail... love it
-
- Silver Member
- Posts: 414
- Joined: Sat Sep 08, 2007 8:39 pm
- Location: Glasgow
Re: transformation from scrapper to euro 6n polo
been following this since donks ago, came across a pic i saved and went digging to find this thread again, what happened to it in the end? got facebook?
Re: transformation from scrapper to euro 6n polo
As a new 6n owner looking for inspiration, you sir are aqt the top of the list.
My Polo is a toy to get me to VW shows (along with a 72 bug and a 86 camper), was thinking Euro route, but it would be nothing compared to yours.
Keep up the good work. Very aweinspiring.
My Polo is a toy to get me to VW shows (along with a 72 bug and a 86 camper), was thinking Euro route, but it would be nothing compared to yours.
Keep up the good work. Very aweinspiring.