What wheels are these? and what are they off?

metz · Post by **metz** » Fri Jul 30, 2004 9:36 am

Can anyone identify these wheels?
A mate of mine has four in the garage and he said i can have them cheap

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 31010&rd=1

cheers guys..

Karl_CLCoupe · Post by **Karl_CLCoupe** » Fri Jul 30, 2004 11:31 am

They do look like Volkswagen alloys. Think they are BBS. Just don't know the name for them. I think also (if you are buying those ones), they should come with hub caps.

Karl.

CBurns · Post by **CBurns** » Fri Jul 30, 2004 12:50 pm

I'm sure that these are the wheels that were on the golf VR6, but i agree that they should have centre caps.

david burton · Post by **david burton** » Fri Jul 30, 2004 12:57 pm

14 inchers on a vr6?

Karl_CLCoupe · Post by **Karl_CLCoupe** » Fri Jul 30, 2004 1:00 pm

They are Golf Mark2 something or other. Not VR6 though. I'm sure, however, that I've seen those on a Rado.

Karl.

Aphex · Post by **Aphex** » Fri Jul 30, 2004 1:45 pm

yea look like the BBS RS/RA or whatever they were called, off the mk2 golf gti if i am not mistaken

Si_GTi · Post by **Si_GTi** » Fri Jul 30, 2004 2:02 pm

You mean these ones?
sorry its a bit large!

bstardchild · Post by **bstardchild** » Fri Jul 30, 2004 2:53 pm

Karl_CLCoupe wrote:They do look like Volkswagen alloys. Think they are BBS. Just don't know the name for them. I think also (if you are buying those ones), they should come with hub caps.

Karl.

Sorry I disagree - those wheels look like they have never had or would accept hub centres - Vauxhall used to do some similar wheels but I'm sure they are not Vauxhall ones.

Surely there will be some Identifing marks on the back of the wheels

ET?? Rim Width x Diameter and normally a manufacturers logo.

metz · Post by **metz** » Fri Jul 30, 2004 3:41 pm

hey guys,

I have just checked the wheels in my mates garage....no identifying marks whatsoever!

not a thing anywhere on the wheel.

they should have caps but he has no idea what happened to them.
He got the wheels on a mk1 golf cabby he used to own, and shoved them in the garage when he got new ones.

metz · Post by **metz** » Fri Jul 30, 2004 4:13 pm

I'm not 100% and i'm hoping the wheel whore himself will confirm this but i reckon the wheels are bbs rj (6 x 14, ET38)

As fitted to the Golf Mk1, Mk2, Scirocco Mk2

Come on pettsy a bit of whoring for you to be had here....confirm i'm correct

pettsy · Post by **pettsy** » Fri Jul 30, 2004 6:20 pm

defo not vr6 as they are 5 stud.

i would hazard a guess at early bbs's, i think they should have a centre cap with one large fake nut. as for a name...im on the case

Matt

SteB · Post by **SteB** » Sun Aug 01, 2004 11:03 am

Definately either RJ or RG altho i think they look more like 14" RJ's since they have a bit of a lip. i like em tho

found this on the web anyways:

BBS RJ (6 x 14, ET38) (6Â½ x 15, ET33)

From: Golf Mk1, Mk2, Scirocco Mk2

Steve

KarlM · Post by **KarlM** » Mon Aug 02, 2004 8:46 am

Weren't these fitted as standard to the GTi 8vs?

pettsy · Post by **pettsy** » Mon Aug 02, 2004 7:21 pm

KarlM wrote:Weren't these fitted as standard to the GTi 8vs?

pretty sure they just came with steels as standard

Krupa · Post by **Krupa** » Mon Aug 02, 2004 8:03 pm

Run-out model 8v Mk2 GTis were fitted with big bumpers and 14" BBS rims as standard. The only obvious ways to tell them apart from their 16v counterparts were the 15" BBS wheels and beesting aerial which the 16v came with.

Those wheels look like BMW 3 series ones to me. They look the same as the ones on Barney Smith's G40: