VCDS help

Chat about your 6R/6C model Polos here!
Post Reply
User avatar
Mayhem
Silver Member
Posts: 275
Joined: Sat Nov 08, 2014 3:07 pm
Drives: 2010 polo 1.2 tsi

VCDS help

Post by Mayhem »

Right iv got my vagcom cable but not too sure how it all works. I want to enable 1 click unlock, mirrors that heat off the rear heater button and change the braking settings as iv read this improves the car alot. Iv loaded up the software but all i see is codes and numbers. Was expecting tick boxes and drop menus. Any one got a step by step or links to how to change the settings?
User avatar
Mart!n-GTI-DK
Platinum Member
Posts: 1401
Joined: Sun Apr 26, 2009 7:43 pm
Drives: '14 Polo BlueGT
Location: Denmark
Contact:

Re: VCDS help

Post by Mart!n-GTI-DK »

Mayhem wrote:Right iv got my vagcom cable but not too sure how it all works. I want to enable 1 click unlock, mirrors that heat off the rear heater button and change the braking settings as iv read this improves the car alot. Iv loaded up the software but all i see is codes and numbers. Was expecting tick boxes and drop menus. Any one got a step by step or links to how to change the settings?
When you go in to the different setting. For example the engine there is a button called "long Coding Helper". When you pres that the tick boxes appear. :)

Image
User avatar
Mayhem
Silver Member
Posts: 275
Joined: Sat Nov 08, 2014 3:07 pm
Drives: 2010 polo 1.2 tsi

Re: VCDS help

Post by Mayhem »

i take it i need to click on each byte to get the relevant tick boxes?
User avatar
Mart!n-GTI-DK
Platinum Member
Posts: 1401
Joined: Sun Apr 26, 2009 7:43 pm
Drives: '14 Polo BlueGT
Location: Denmark
Contact:

Re: VCDS help

Post by Mart!n-GTI-DK »

Mayhem wrote:i take it i need to click on each byte to get the relevant tick boxes?
You are correct sir. :)
Post Reply