15" or 16" - please advise...

Chat about your MKIV (6N) Polo
Post Reply
Golfather
Getting There!
Posts: 50
Joined: Tue Dec 30, 2003 9:49 pm
Location: Bedfordshire

15" or 16" - please advise...

Post by Golfather »

Here's the thing...

in a week i'll have a 60mm Spax Top Adjustable Kit....great! :D

i've still not acquired any wheels and need to know the following... :?

Should I expect arch contact with 7.5 x 16 wheels, after lowering 60mm?

I need to decide whether to get 15s or 16s before the suspension is fitted.

Advice appreciated :wink:
merstham_phil
Getting There!
Posts: 64
Joined: Wed Oct 29, 2003 1:14 am
Location: surrey

Post by merstham_phil »

depends on your tyre profile mate....

i had 16'son 45 profiles with a 60mm drop, and they scrubbed like a b***h at first, but when the arch liners etc were removed there wasnt any scrubbage....

but if you get 40 prfoiles you wont get any problems at all....
Golfather
Getting There!
Posts: 50
Joined: Tue Dec 30, 2003 9:49 pm
Location: Bedfordshire

hELP! car lowered 60mm - will 16's be OK?

Post by Golfather »

Guys, things are getting desperate....

7x16s with 195/45/16.........

- will the tyres rub after lowering the car 60mm?
- am i worrying for no reason?
- perhaps it's time for the finger to be removed :wink:


you've got to prevent me from buying 15s :roll: !!
david burton
Bling Bling Diamond Member
Posts: 3082
Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:

Post by david burton »

hmmm, that's going to be darn close - I'd say don't buy 16's mate.

I have 195 x 45 x 15's and they're 7 inches wide. They're very close after 60mm of drop.

you've got another 1/2 inch to worry about - seriously close to the arch mate. I think you'll have trouble. only at the front though. get 40's on the front :)
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Post by carmadaaron »

get 195/40/16 and ull be laughing!
Golfather
Getting There!
Posts: 50
Joined: Tue Dec 30, 2003 9:49 pm
Location: Bedfordshire

Post by Golfather »

It's an expensive tyre m'man not to the mention the jaw-judderring sensation the missus will encounter every time she's out.....

hence being adamant on 45 profile....it would appear that the best way forward is to lower by 40-45mm and don 16s for effect and ride quality.

Kahns look phat btw :wink:
merstham_phil
Getting There!
Posts: 64
Joined: Wed Oct 29, 2003 1:14 am
Location: surrey

Post by merstham_phil »

well.....

i had 16x7.5" on 45 profiles..... on a 60mm drop....

at first it scrubbed like a royal b***h.... changed the bumpers, and removed the s**t and it was a whole lot better.... but still alil it of scrubbage.....

you might be alright.....but might not.....

so do it....and if you get probs, take the s**t out and see how it is..... if not then u'll have to get the arches rolled.....

if you drop it 40mm you WILL be dissapointed!!! i did, and hated it....dropped it 60, and still wasnt happy!!

15's are the easy option....

but depends what look you want to go for!
Post Reply