Lowerinng
-
- New
- Posts: 8
- Joined: Sun Nov 30, 2014 6:18 pm
- Drives: 9n 1.2 TWIST
Re: Lowerinng
i personally wouldn't lower 50mm just on springs because you will be running the stock car shock absorber i imagine which is not made for that ride height, not only will it be uncomfortable you will also 'bottom out' your stock shocks as they will already be '50mm' compressed. If you were to get a set of slightly more expensive coil-overs instead you can avoid this issue completely as they are made for more lows. If you didnt want to spend the money on coilovers and did just want springs i would suggest going a max drop of 30-35mm to be safe.
-
- Silver Member
- Posts: 486
- Joined: Mon May 13, 2013 7:20 am
Re: Lowerinng
Thats not really even that low lol