ciclo's Polo. R-line 1.2 TSI 90hp 119gr.🤝

[ciclo]

J386__TSG_FT 003 8662
Coding: 0000A5

J387__TSG_BT 003 8662
Coding: 1000A5

With these codings can you opening the door correctly?

[shpunt]

yes. this coding is my factory door coding.

[ciclo]

Possible codings:

driver door : 0080AF
passenger door: 1080AF

or

driver door: 0280AF
passenger door: 1080AF

or

driver door: 0000AF
passenger door: 1000AF

or

driver door: 0200AF
passenger door: 1000AF

Try these codings and tell us the results of the codes with fewer functions losses.

[ciclo]

I found these codes from a Beetle 5C. The control units of the windows are to Bleetle with folding mirrors.

Subsystem 2 - Part No SW: 6R0 959 801 AQ HW: 6R0 959 801 AQ Labels: 6R0-959-801.CLB
Component: J386__TSG_FT 002 1060
Coding: 0CBC34

Subsystem 3 - Part No SW: 6R0 959 802 BD HW: 6R0 959 802 BD
Component: J387__TSG_BT 002 1060
Coding: 0CBC34

[shpunt]

Good.
But for J386 and J387 is the same coding.
Is this correct?

[ciclo]

Yes, however, you should consider that might have the power window motors and has no folding mirrors. It is rare, but possible.

LINK

[shpunt]

Ok.
Byte 3 and bits 3,4,7 must be market too?

[ciclo]

Not necessarily.
Try it without / with... without information in vcds labels anything is possible.

----------------------------------

ciclo
Platinum Member
Posts: 1001

I never thought I would be able to write more than a thousand posts in English. I love me...

[shpunt]

ok.
but on your link i see different coding.
in up pade side: Coding: 0CBC34
and down page side: Coding: 8CBC30
what correct for auto folding?

[ciclo]

The first autoscan. 0CBC34

In the second autoscan the reference number of the window motors are incorrect.

[shpunt]

ok. i'll try this Coding: 0CBC34

[auspolo6c]

hi just wondering if u could help me with the red wire do u bridge the two together on the relay or how do u do it do u connect 12 to the relay then pin 30 to car fuse box... im lost and I already blowen up two units sad to say as I have done a lot of work to my car and this is the one thing I cant get right

[shpunt]

Coding: 0CBC34
Is this coding for auto folding mirrors after lock car or simple folding mirrors ?

[ciclo]

hi just wondering if u could help me with the red wire do u bridge the two together on the relay or how do u do it do u connect 12 to the relay then pin 30 to car fuse box... im lost and I already blowen up two units sad to say as I have done a lot of work to my car and this is the one thing I cant get right

Of course I can help you, but I wonder if you can specify exactly what you are doing.
What are you doing and what is your installation guide?
You have the Polo 6C, not 6R, is it right?

[ciclo]

Coding: 0CBC34
Is this coding for auto folding mirrors after lock car or simple folding mirrors ?

Good question.