How do I get inside the interior light domes?

Chat about your 6R/6C model Polos here!
Post Reply
Lirik
New
Posts: 2
Joined: Wed Aug 05, 2015 12:50 pm
Drives: Polo 2011 1.4 SE (rhd)

How do I get inside the interior light domes?

Post by Lirik »

I want to swap the bulbs in the main dome for some brighter ones but a search on google only shows results for more basic domes in VW's range of cars where the "frosted" part can easily be pried away.

Well, in this dome the "frosted" part is flush and there's no easy point of entry that I can find. I started gently pully at the housing itself but didn't want to go too far in case it was actually screwed in.

Image

It's the same at for the light dome in the back of the car, no easy access that I can see.

Can anyone give me any tips on where I should be prying/pulling in order to access the bulbs in either of the light domes?

Thanks :)
User avatar
Mart!n-GTI-DK
Platinum Member
Posts: 1401
Joined: Sun Apr 26, 2009 7:43 pm
Drives: '14 Polo BlueGT
Location: Denmark
Contact:

Re: How do I get inside the interior light domes?

Post by Mart!n-GTI-DK »

You need a plastic prybar like this to insert along the edge of the glass to pry it out so you can access the bulbs. :)

Image
User avatar
Bigtam
Bronze Member
Posts: 192
Joined: Sun Sep 23, 2012 9:02 pm
Drives: Polo GTI 2016
Location: East Lothian

Re: How do I get inside the interior light domes?

Post by Bigtam »

Its just clips that hold it in I removed the rear plastic part in your picture first just needs a descent tug
Post Reply