Evening all,
heard so banging coming from the old gal tonight and thought i'd take a look what was going on, was greeted with this -
The roll bar has come free from the wishbone by means of the fitting failing, can i buy a new fitting for the roll bar / wish bone?
What's the fix here -
Re: What's the fix here -
you need a new anti roll bar link fitting kit,just bolt on,
Re: What's the fix here -
cheers dude - any ideas where stocks them??tones 61 wrote:you need a new anti roll bar link fitting kit,just bolt on,
-
- Silver Member
- Posts: 375
- Joined: Fri Oct 05, 2012 8:40 pm
- Drives: 6N2 GTI, Golf GTD + R32, T5.1 BiTDI DSG
- Location: Lincoln
Re: What's the fix here -
Mine went through an MOT with a broken drop link! You'll probably find it easier to slit the old drop link eye end part with an angle grinder btw. Clean up your ARB and put a little grease on the end before you push the new drop link on, make sure you orientate it the right way around before you push it on too!
I got mine from TPS for less than £20 IIRC
I got mine from TPS for less than £20 IIRC
Re: What's the fix here -
6n2stan wrote:Mine went through an MOT with a broken drop link! You'll probably find it easier to slit the old drop link eye end part with an angle grinder btw. Clean up your ARB and put a little grease on the end before you push the new drop link on, make sure you orientate it the right way around before you push it on too!
I got mine from TPS for less than £20 IIRC
cheers for the heads up on slitting the old one.
£28 from TPS - thats for all the bits not just the link, so not bad really.
My MOT is due in a couple weeks but i dont think Stevie Wonder is doing it so i better fix it