ciclo's Polo. R-line 1.2 TSI 90hp 119gr.🤝
-
sanders
- New
- Posts: 26
- Joined: Tue Jul 14, 2015 4:33 pm
- Drives: 6r bluemotion tdi 1.2
- Location: Netherlands
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Will do ciclo,
Could it be the lightswitch? Because when I push the knob to disengage the switch the green light from the foglight turnsters red as it should be. I check the wiring again hope to find something.
Verstuurd vanaf mijn GT-I9505 met Tapatalk
Could it be the lightswitch? Because when I push the knob to disengage the switch the green light from the foglight turnsters red as it should be. I check the wiring again hope to find something.
Verstuurd vanaf mijn GT-I9505 met Tapatalk
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Then, in that case, post here the coding of your BCM & RLS, only.
-
sanders
- New
- Posts: 26
- Joined: Tue Jul 14, 2015 4:33 pm
- Drives: 6r bluemotion tdi 1.2
- Location: Netherlands
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
i opened a new topic with the full vcds scan ciclo
saw your post to late but if you like i could post it her also
saw your post to late but if you like i could post it her also
-
sanders
- New
- Posts: 26
- Joined: Tue Jul 14, 2015 4:33 pm
- Drives: 6r bluemotion tdi 1.2
- Location: Netherlands
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
scan from bcm with rls
Address 09: Cent. Elect. (J519) Labels: 6R0-937-08x-09.clb
Part No SW: 6R0 937 088 F HW: 6R0 937 088
Component: BCM PQ25 Re4 H50 0353
Revision: BU050001 Serial number: 0456 026120185
Coding: 3AB02BBF08F32400B3380FB06EAB0ED95F80612F7E862441200000000000
Shop #: WSC 00788 648 00255
VCID: 418F3546D8FEA016D43-8014
Subsystem 1 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 270812 05 54 0403
Coding: 06302D
Address 09: Cent. Elect. (J519) Labels: 6R0-937-08x-09.clb
Part No SW: 6R0 937 088 F HW: 6R0 937 088
Component: BCM PQ25 Re4 H50 0353
Revision: BU050001 Serial number: 0456 026120185
Coding: 3AB02BBF08F32400B3380FB06EAB0ED95F80612F7E862441200000000000
Shop #: WSC 00788 648 00255
VCID: 418F3546D8FEA016D43-8014
Subsystem 1 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 270812 05 54 0403
Coding: 06302D
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
http://www.uk-polos.net/viewtopic.php?f ... 18#p500522sanders wrote:scan from bcm with rls
-
sanders
- New
- Posts: 26
- Joined: Tue Jul 14, 2015 4:33 pm
- Drives: 6r bluemotion tdi 1.2
- Location: Netherlands
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
what i did find ciclo, is that when i was removing the pin out of the 17 pin connector i didn't had a pin on position three (daylight).
but if i check the schematic on etka don't i need from pin 8 on 17 pin connector a wire thru pin 7 on bcm t73a? i saw on your schematic that it is only for retrofit?
greetz
but if i check the schematic on etka don't i need from pin 8 on 17 pin connector a wire thru pin 7 on bcm t73a? i saw on your schematic that it is only for retrofit?
greetz
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
http://www.uk-polos.net/viewtopic.php?f ... 43#p500543sanders wrote:what i did find ciclo, is that when i was removing the pin out of the 17 pin connector i didn't had a pin on position three (daylight).
but if i check the schematic on etka don't i need from pin 8 on 17 pin connector a wire thru pin 7 on bcm t73a? i saw on your schematic that it is only for retrofit?
greetz
- iichel
- Bling Bling Diamond Member
- Posts: 6685
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
how come your AUX port has a little cover on it? 
- Mart!n-GTI-DK
- Platinum Member
- Posts: 1401
- Joined: Sun Apr 26, 2009 7:43 pm
- Drives: '14 Polo BlueGT
- Location: Denmark
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Isn't that how they all are???iichel wrote:how come your AUX port has a little cover on it?
- iichel
- Bling Bling Diamond Member
- Posts: 6685
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
mine looks like this:


- CNK
- Gold Member
- Posts: 634
- Joined: Mon Apr 06, 2015 10:18 pm
- Drives: 6R
- Location: https://polo.blue/
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
I also have a AUX port like iichel:


- iichel
- Bling Bling Diamond Member
- Posts: 6685
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
the new port is part number 6R0035724 and it looks like a straigt fit. should cost around 10 euros.
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Yes, it uses the same connector as the old one (5M0035714).
-
RUM4MO
- Bling Bling Diamond Member
- Posts: 6069
- Joined: Sat Dec 30, 2006 9:12 pm
- Drives: B8 S4 & 6R/6C1 1.2TSI 110
- Location: Mid Lothian
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
"FOD" yes used a lot in aerospace industries, we have a guy that gets called FOD, but that stands for "F" off Dave, though stolen from the original use of FOD! As you might guess, he was not everyone's best friend!




