Hi all
New to this forum I have got a 2010 polo 1.6tdi sel model and plugged in my solus ultra machine to knock off service light as I did the service but since I knocked the spanner light off my coil light flashes and abs flash the traction light and tyre pressure light both stay on constant after checking for fault codes this is what shows
P0610 control module vehicle options error
01299 diagnostic interface for data bus (j533) no or wrong adaption
01044 control module incorrectly coded
Any help would be greatly appreciated
Cheers Ian
Vw polo wrapped in matte black rose
Warning lights on dash
-
RUM4MO
- Bling Bling Diamond Member
- Posts: 6069
- Joined: Sat Dec 30, 2006 9:12 pm
- Drives: B8 S4 & 6R/6C1 1.2TSI 110
- Location: Mid Lothian
Re: Warning lights on dash
Hello and welcome!
As for your problem, sharp intake of breathe - maybe your scan tool was not compatible with that car?
Personally, I'd stick with VCDS or for small things, maybe go for Carista - well that might be my next purchase for keeping in the car (Christmas present to me!).
As for your problem, sharp intake of breathe - maybe your scan tool was not compatible with that car?
Personally, I'd stick with VCDS or for small things, maybe go for Carista - well that might be my next purchase for keeping in the car (Christmas present to me!).