Polo 6R lowering springs

[Will6R]

Hi, just bought a set of h&r 25/40mm lowering springs for my 1.2tsi but still unsure if I should fit them or not? What's the ride gonna be like? Will it cause any damage to the dampers and stuff? Also will it scrape on things it normally wouldn't? Thanks

[Absolutepolo]

Hi there. I bought genuine lowering springs from vw for my 6r 1.2tsi. No scrapping. rides as little bit firmer but nothing uncomfortable. Looks good to. Not to low either so i can get over speed bumps. Hope this helps.

[haflidij]

Hi, just bought a set of h&r 25/40mm lowering springs for my 1.2tsi but still unsure if I should fit them or not? What's the ride gonna be like? Will it cause any damage to the dampers and stuff? Also will it scrape on things it normally wouldn't? Thanks

I have the H&R 35/55mm lowering springs . The ride is way lower of course and its firmer. Going over speed bumps isn't a problem for me , the biggest problem is going in and out of car lots that have that raised up curb from the street it self.
But the only thing that's scraping is the mudflaps so the car itself isn't getting any damage. Also i havent had any problems with my dampers and ive had mine in since around May of last year.
Soooo...Haha all in all you should be good

[smelliot]

Hi, just bought a set of h&r 25/40mm lowering springs for my 1.2tsi but still unsure if I should fit them or not? What's the ride gonna be like? Will it cause any damage to the dampers and stuff? Also will it scrape on things it normally wouldn't? Thanks

I have the H&R 35/55mm lowering springs . The ride is way lower of course and its firmer. Going over speed bumps isn't a problem for me , the biggest problem is going in and out of car lots that have that raised up curb from the street it self.
But the only thing that's scraping is the mudflaps so the car itself isn't getting any damage. Also i havent had any problems with my dampers and ive had mine in since around May of last year.
Soooo...Haha all in all you should be good

hi i was wondering if you have any picture of your polo on these lowering spings as im in the middle of getting 25mm/40mm or 35mm/55mm but not sure how would sit on my 6r gti

[haflidij]

Hi, just bought a set of h&r 25/40mm lowering springs for my 1.2tsi but still unsure if I should fit them or not? What's the ride gonna be like? Will it cause any damage to the dampers and stuff? Also will it scrape on things it normally wouldn't? Thanks

I have the H&R 35/55mm lowering springs . The ride is way lower of course and its firmer. Going over speed bumps isn't a problem for me , the biggest problem is going in and out of car lots that have that raised up curb from the street it self.
But the only thing that's scraping is the mudflaps so the car itself isn't getting any damage. Also i havent had any problems with my dampers and ive had mine in since around May of last year.
Soooo...Haha all in all you should be good

hi i was wondering if you have any picture of your polo on these lowering spings as im in the middle of getting 25mm/40mm or 35mm/55mm but not sure how would sit on my 6r gti

This is mine on 35/55 H&R springs.

[smelliot]

I have the H&R 35/55mm lowering springs . The ride is way lower of course and its firmer. Going over speed bumps isn't a problem for me , the biggest problem is going in and out of car lots that have that raised up curb from the street it self.
But the only thing that's scraping is the mudflaps so the car itself isn't getting any damage. Also i havent had any problems with my dampers and ive had mine in since around May of last year.
Soooo...Haha all in all you should be good

hi i was wondering if you have any picture of your polo on these lowering spings as im in the middle of getting 25mm/40mm or 35mm/55mm but not sure how would sit on my 6r gti

This is mine on 35/55 H&R springs.

is that on the 17" just trying to get an idea as dont want my gti too low but stock it has way to much arch gap and since having it remapped is not sticking to the corners that well

[peter_dk25]

H&R 25/40 on 17" :

[smelliot]

H&R 25/40 on 17" :

thanks alot guys think i might go the 25mm/40mm as looks nice and isnt too low

[smelliot]

H&R 25/40 on 17" :

do you know weight i would use for the gti is it
Image 1
H&R Spring Kit Polo 6R (06/09>) - Front Axle From 930kg

or would it be
H&R Spring Kit Polo 6R (06/09>) - Front Axle Upto >929kg

[haflidij]

hi i was wondering if you have any picture of your polo on these lowering spings as im in the middle of getting 25mm/40mm or 35mm/55mm but not sure how would sit on my 6r gti

This is mine on 35/55 H&R springs.

is that on the 17" just trying to get an idea as dont want my gti too low but stock it has way to much arch gap and since having it remapped is not sticking to the corners that well

Hey again. This is on 16'' Here is a better photo maybe.
https://postimg.org/image/y387e5qo5/

[peter_dk25]

"do you know weight i would use for the gti is it
Image 1
H&R Spring Kit Polo 6R (06/09>) - Front Axle From 930kg

or would it be
H&R Spring Kit Polo 6R (06/09>) - Front Axle Upto >929kg"

Not easy to say - find the 6R GTI here:
http://www.h-r.com/en/produktfinder.html#
I think the PR-codes for your car gives the answer...