RNS 510 question
-
Nlolotte
- Getting There!
- Posts: 86
- Joined: Fri Mar 18, 2016 10:45 pm
- Drives: Polo 1.2 R-Line TSI 6R
- Location: England
RNS 510 question
If i buy RNS 510 will navigation automatically show on my highline mfd or do i need to code it in?
-
CNK
- Gold Member
- Posts: 634
- Joined: Mon Apr 06, 2015 10:18 pm
- Drives: 6R
- Location: https://polo.blue/
- Contact:
Re: RNS 510 question
You need other instrument cluster (BlueGT or WRC or GTI)
-
Nlolotte
- Getting There!
- Posts: 86
- Joined: Fri Mar 18, 2016 10:45 pm
- Drives: Polo 1.2 R-Line TSI 6R
- Location: England
Re: RNS 510 question
i have the glut gt one already
-
iichel
- Bling Bling Diamond Member
- Posts: 6685
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: RNS 510 question
Then you'll be fine
-
Nlolotte
- Getting There!
- Posts: 86
- Joined: Fri Mar 18, 2016 10:45 pm
- Drives: Polo 1.2 R-Line TSI 6R
- Location: England
Re: RNS 510 question
thank you! so plug and play no vcds?
-
habib_123
- Bronze Member
- Posts: 140
- Joined: Sat Jul 11, 2015 11:21 pm
- Drives: Polo 6R 2012 1.2TDI RHD
- Location: Birmingham, UK
- Contact:
Re: RNS 510 question
If you do install the RNS-510 you will need to code it into the car (VCDS). Go into CAN Gateway installation list and tick the box for navigation.
Once done go back out, and into navigation and check coding. I can provide mine if needed.
Good luck!
Once done go back out, and into navigation and check coding. I can provide mine if needed.
Good luck!