ciclo's Polo. R-line 1.2 TSI 90hp 119gr.🤝
-
peter_dk25
- Silver Member
- Posts: 462
- Joined: Wed Jun 18, 2014 6:58 am
- Drives: Blue GT
- Location: Denmark
-
chisyelamos1
- New
- Posts: 23
- Joined: Sat Jan 02, 2016 9:44 am
- Drives: 6c 1.4tdi
- Location: Serón, Spain
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Hello ciclo.
I Will install globebox ligth but i want to know what light bulb i need? Festoon 31mm? Or 36mm?
It is for buy led bulb while come the order
Thanks
Enviado desde mi LG-H815 mediante Tapatalk
I Will install globebox ligth but i want to know what light bulb i need? Festoon 31mm? Or 36mm?
It is for buy led bulb while come the order
Thanks
Enviado desde mi LG-H815 mediante Tapatalk
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Hello chisyelamos1,chisyelamos1 wrote:Hello ciclo.
I Will install globebox ligth but i want to know what light bulb i need? Festoon 31mm? Or 36mm?
It is for buy led bulb while come the order
Thanks
Enviado desde mi LG-H815 mediante Tapatalk
36mm
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
iichel wrote:K-Line time!!
Well, as you know this morning I went to my VW dealer to check for updates in the following units; engine control unit, BCM-Gateway, ABS unit, and Instrument cluster.peter_dk25 wrote:X fingers
All units were checked with ODIS program and just the engine control unit was updated.
From:
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZC) Labels: 03F-906-070-CBZ.clb
Part No SW: 03F 906 070 GD HW: 03F 907 309 AJ
Component: SIMOS10.22AH10 2686
Revision: --H10--- Serial number: 00000000000000
Coding: 001100D6202400080000
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_ECM12TFS02103F906070GD 004004
ROD: EV_ECM12TFS02103F906070FJ.rod
VCID: 6A0F8AD4DFA86FC442-803E
No fault code found.
Readiness: 0110 0101
-------------------------------------------------------------------------------
To:
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZC) Labels: 03F-906-070-CBZ.clb
Part No SW: 03F 906 070 GD HW: 03F 907 309 AJ
Component: SIMOS10.22AH10 5466
Revision: --H10--- Serial number: 00000000000000
Coding: 001100D6202400080000
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_ECM12TFS02103F906070GD 004007
ROD: EV_ECM12TFS02103F906070FJ.rod
VCID: 6A7F1A442F38FFB4F2-803E
No fault code found.
Readiness: 0110 0101
-------------------------------------------------------------------------------
But without getting the CCD (GRA_High) activation after checking the possible adaptations (ECU = no adaptation, Instrument cluster = no available like in vcds).
Although it was not possible to get the cruise control display function I want thank the full cooperation of my VW dealer to try to get it. (excellent)
The K-line (which I have spoken in previous posts) had no remarkable effect.
On the short drive from the VW dealer to my house I could see that my R-line is faster and spends less with the new ECU sotfware. Just kidding
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
[emoji53]shameciclo wrote:
---------------------------------------
But without getting the CCD (GRA_High) activation after checking the possible adaptations (ECU = no adaptation, Instrument cluster = no available like in vcds).
Sent from my iPhone using Tapatalk
- iichel
- Bling Bling Diamond Member
- Posts: 6685
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
At least you tried 
-
peter_dk25
- Silver Member
- Posts: 462
- Joined: Wed Jun 18, 2014 6:58 am
- Drives: Blue GT
- Location: Denmark
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
No more possibilities and ways to try 
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
It is certainly a shame, maybe someday some genius achieves to run this function in a POLO 6R 2012-2014 (not WRC).Adam87 wrote:
[emoji53] shame
I appreciate all your help on this issue through email, I'm not used to getting so much help.
By the way, I'm ready for anything you need, e.g the wiring adaptation BCM Max for your T5.2, etc...
Ask me, the universe force will do the rest.
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Yes, it's the important.iichel wrote:At least you tried
Install an ECU with a compatible software for your 6R engine and gearbox from other models (vw, skoda...) with this feature factory.peter_dk25 wrote:No more possibilities and ways to try
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
SO, next step done.
Used
Window regulator motors:
6R0959801BD Z0D
6R0959802BF Z03
And coding
Subsystem 2 - Part No SW: 6R0 959 801 BD HW: 6R0 959 801 BD Labels: 6R0-959-801.CLB
Component: J386__TSG_FT 003 8612
Coding: 0200A3
Subsystem 3 - Part No SW: 6R0 959 802 BF HW: 6R0 959 802 BF
Component: J387__TSG_BT 003 8612
Coding: 1000AB
And have question ;D
How can I code windows regulator motors to at the opening of the pilot car mirrors is unfold? Currently decompose when I turn the key. Can it be changed? :>
Used
Window regulator motors:
6R0959801BD Z0D
6R0959802BF Z03
And coding
Subsystem 2 - Part No SW: 6R0 959 801 BD HW: 6R0 959 801 BD Labels: 6R0-959-801.CLB
Component: J386__TSG_FT 003 8612
Coding: 0200A3
Subsystem 3 - Part No SW: 6R0 959 802 BF HW: 6R0 959 802 BF
Component: J387__TSG_BT 003 8612
Coding: 1000AB
And have question ;D
How can I code windows regulator motors to at the opening of the pilot car mirrors is unfold? Currently decompose when I turn the key. Can it be changed? :>
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
You are most welcome, would be nice for someone to solve one of your mysteries for all the help you give out [emoji6] we shall keep trying [emoji23]ciclo wrote:
It is certainly a shame, maybe someday some genius achieves to run this function in a POLO 6R 2012-2014 (not WRC).
I appreciate all your help on this issue through email, I'm not used to getting so much help.
By the way, I'm ready for anything you need, e.g the wiring adaptation BCM Max for your T5.2, etc...
Ask me, the universe force will do the rest.
And I very much appreciate your help for my T5 [emoji106]
Sent from my iPhone using Tapatalk
- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Good job favi.
Still unknown if it is possible such coding, anyway I think that is better how they are unfolded in the standard way to avoid they may be unfolded whenever you unlock/open the car. For example, if you open the car only to catch something from the glove box
If you need the mirrors before you turn the ignition key to ACC position you can use the knob mirrors switch.

Still unknown if it is possible such coding, anyway I think that is better how they are unfolded in the standard way to avoid they may be unfolded whenever you unlock/open the car. For example, if you open the car only to catch something from the glove box
If you need the mirrors before you turn the ignition key to ACC position you can use the knob mirrors switch.

- ciclo
- Bling Bling Diamond Member
- Posts: 8837
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, Spain.
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
I have had a new idea about the CCD that I overlooked because of how stupid it is... but I will try it.Adam87 wrote: You are most welcome, would be nice for someone to solve one of your mysteries for all the help you give out [emoji6] we shall keep trying [emoji23]
More info the next week...if I have success.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
UnderstandAdam87 wrote:You are most welcome, would be nice for someone to solve one of your mysteries for all the help you give out [emoji6] we shall keep trying [emoji23]ciclo wrote:
It is certainly a shame, maybe someday some genius achieves to run this function in a POLO 6R 2012-2014 (not WRC).
I appreciate all your help on this issue through email, I'm not used to getting so much help.
By the way, I'm ready for anything you need, e.g the wiring adaptation BCM Max for your T5.2, etc...
Ask me, the universe force will do the rest.
And I very much appreciate your help for my T5 [emoji106]
Sent from my iPhone using Tapatalk
So, mission complete. And now? Instrument cluster high version and BCM max
- iichel
- Bling Bling Diamond Member
- Posts: 6685
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
you will retrofit a DSG?ciclo wrote: because of how stupid it is... but I will try it.
More info the next week...if I have success.

