Coding parking sensors

[Andrea 6r]

hello everyone,
I wanted to know why error appears when I try to activate, with vag 10.6.4, parking sensors

thanks

[iichel]

well it's pretty self-explanatory, right? you need to enter a code in the button 'security access' at the right bottom.
it's 71679

[Andrea 6r]

I tried but it seems to enter is not saved and buy -31 error


Inviato dal mio iPod touch utilizzando Tapatalk

[iichel]

location where to give in the security access -->

[Andrea 6r]

I make a screen just try
but I have already tried to add the access code

[Andrea 6r]

I tried to enter the security access that is accepted
but when I try to change something in the coding is still found "error 33 security access"


if I try to insert a random number, in coding, you get this error
but I think it's normal

before I was referring to this

I tried but it seems to enter is not saved and buy -31 error


Inviato dal mio iPod touch utilizzando Tapatalk

[iichel]

look precisely.

in the first post, you have an error 33
error 33: security access required

in your last post, you have an error 31
error 31: request out of range (meaning: your coding does not make any sense)
which is logical if you put in random numbers.

there is a difference between error 31 and 33

[Andrea 6r]

perfect
on coding, then error 33, there is more to try?

[iichel]

enter correct security code, and then give in a sensible coding, then it should be ok.

[Andrea 6r]

I tried to insert the codes: 100101 and 100101
but AFTER you have entered it (logically one at a time) appears safe access

although I try encoding "Manual" from the coding that appears safe access

it seems that is not "saved" this security access is required

[iichel]

It happens many times that the China pdc module does not allow the code to be changed, unfortunately

[Andrea 6r]

Grazie Jay-Jay
It was only hold vag



Inviato dal mio iPod touch utilizzando Tapatalk