Polo 6N2 1.4 8v AKK Engine Torque Specs

[Rizzstar]

Hi there does anyone have any references to the torque specs, mostly the cylinder head bolts but I'm doing a HG change so any specs anyone can throw up relevant to the engine bay area would be great. I've tried finding a Haynes for the 6N2 but I don't seem to be having much luck and I don't know if I can use the specs from a 6N as it's a different engine.

Thanks everyone,
Paul.

[alexperkins]

I'll see if I can dig them out for you

Is it just the head bolts you need?

[Rizzstar]

Thanks pal. Anything that attaches to the engine really. Mainly off the top of my head, Inlet Manifold bolts, Injector Rail bolts, Exhaust manifold studs and nuts, Downpipe nuts, all timing belt pulleys and the idlers and tensioner. I think that covers the majority of the important stuff that I'd feel better torquing as opposed to tighten to feel. Oh, any cam carrier bolts as I will be doing the valve stem seals so I'll need to remove the cam. Thanks!

[alexperkins]

I'll scan the Haynes manual for you as that's got it all listed

[Rizzstar]

Any idea where I can buy one as I can only find 6N ones and they have a different 1.4 8v :/

[alexperkins]

Halfords amazon eBay to name a few