Here is the wiring diagram for it
![Image](http://i1241.photobucket.com/albums/gg517/inosum187/Mobile%20Uploads/140006E7-D1E8-4576-B3A1-D8D56760AF19_zpsw3mmewit.jpg)
And here is the relay next to the carrier
![Image](http://i1241.photobucket.com/albums/gg517/inosum187/Mobile%20Uploads/5D8F0000-BFB2-4341-9E14-182698533AA6_zpsnxj7engp.jpg)
The CAN-isolation relay is 3C0 951 253 A as in ETKA.
But the pins on the relay don't match the diagrams
Sent from my iPhone using Tapatalk
Exactly.Adam87 wrote: And T6 one doesn't match the pins on the holder, unless the T6 holder has the pin numbers in a different order
Sent from my iPhone using Tapatalk
I've done the Lane Change Assist retrofit on my Polo 6R.ciclo wrote:
I know people who have used two universal relays, one for Can High and one for Can Low (it seems to work correctly).